Datasheet

2
Amphenol Miniature Cylindrical
design exibility
The large family of miniature proprietary and MS style connectors provides for
many optional features and designs. In addition to the choices of bayonet or
threaded shells, solder or crimp termination within the style variations, there are
additional options that are shown here.
Hermetics
Hermetically sealed receptacles have fused compression glass sealed
inserts which provide envionrmental moisture sealing. There are three
hermetic styles within the PT bayonet series.
Coaxial Contacts
Amphenol Miniature connectors can incorporate shielded coax
contacts. Size 8 and 12 crimp coax contacts are available in PT-SE,
SP-SE, MS/PT-SE. Factory installed size 8 and 12 solder type coax
contacts are available in PT, SP,MS/PT connectors. See coax contact
information pages at the end of this catalog.
Printed Circuit Board Tail Contacts
PT bayonet connectors in box mounting receptacle and jam nut receptacle styles are
avail able with printed circuit board contacts. Standard PCB tails for MIL-DTL-26482
connectors have gold plating, .0050 inches over nickel. See page 20 and call Amphenol
for further infor mation.
Flex Circuitry
Flex termination assemblies for attaching cylindrical connectors to printed circuit boards
are available through the Amphenol division ACT, Advanced Circuit Technology. Flex can
be used with miniature 26482 connectors and it can be designed to meet specic length,
current carrying capacity and to t the precise geometric shape of the connector to board
package. Flex circuity plugs into a printed circuit board and creates a self-locking terminal
pad which eliminates the need for an additional interconnect to the PCB.
Filter Protection
Amphenol offers the FPT Series which combines the miniature PT series with an EMI
lter. Designed to provide EMI protection for sensitive circuits, each circuit is individually
ltered within the con nector, eliminating the need for costly and bulky exterior network
lters. Filter contacts are available in MF, HF, VHF, and UHF ranges and are
intermateable and intermountable with MIL-DTL-26482 con nectors. For further
information see catalog 12-120, Amphenol EMI Filter Transient Protection Connectors.
Overmolded Cable
Overmold seals and cables can be designed for almost any industrial application.
A variety of materials are available: neoprene, hypalon and others; and a variety of
lengths can be designed to meet customer specications. Overmold seals to the rear of
the connector and to the cable jacket providing moisture sealing.
®
PT Connector with PC Tail
Contacts
PT Connector with Flex
PT Connector with Hermetic
Seal Insert and Coax Contacts
PT Connector with Overmolded Cable
PT Connector with EMI
Filter Protection