Datasheet

2
www.sineco.com
RT SERIES
SERIES
- RT
SHELL TYPE
- 0: Wall mount recep.
- 1: Inline receptacle
- 6: Cable plug
- 7: Jam nut recep. / rear panel mount
SHELL SIZE
- 10, 12, 14, 16, 18, 20
INSERT ARRANGEMENT
- See Page 7
TYPE OF CONTACTS
- P: Pin contacts
- S: Socket contacts
INSERT POLARIZATION (See Detail below)
- N: Standard version
- W, X, Y, Z: Custom orientation (consult Factory)
APPLICATION
- Blank: Standard version (no o-ring)
- H: Standard version, water protection IP67
DESIGN VARIATION
- Blank: Standard version
- EC: End cap & standard seal for wire 18~14AWG
- MM: End cap & reduced seal for wire 24~20AWG
PLATING
- Blank: Standard is nickel plating (48hr salt spray)
- 1: Black anodized, jam nut (96hr salt spray)
- 2: Black anodized coupling ring (96hr salt spray)
INTERFACIAL SEAL VARIATION
- Blank: Standard version, NBR
- 03: O-ring and seal gasket is silicone rubber
- 04: O-ring and seal gasket is Viton
RTHP SERIES
SERIES
- RT
SHELL TYPE
- 0: Wall mount recep.
- 1: Inline receptacle
- 6: Cable plug
- 7: Jam nut recep. / rear panel mount
SHELL SIZE
- 12, 14, 16, 20
INSERT ARRANGEMENT
- See Page 7
TYPE OF CONTACTS
- P: Pin contacts
- S: Socket contacts
INSERT POLARIZATION
- N: Standard version
APPLICATION
- Blank: Standard version (no o-ring)
- H: Standard version, water protection IP67
DESIGN VARIATION
- Blank: Standard version
- EC: End cap
PLATING
- Blank: Standard is nickel plating (48hr salt spray)
- 1: Black anodized, jam nut (96hr salt spray)
- 2: Black anodized coupling ring (96hr salt spray)
INTERFACIAL SEAL VARIATION
- Blank: Standard version, NBR
- 03: O-ring and seal gasket is silicone rubber
- 04: O-ring and seal gasket is Viton
SERIES STYLE SHELL TYPE
INSERT
ARRANGEMENT
TYPE OF
CONTACTS
INSERT
POLARIZATION
APPLICATION
DESIGN
VARIATION
PLATING
INTERFACIAL SEAL
VARIATION
* * * * * * * * * *
Z°
W°
X°
Y°
N
Detail
Mating Face View of Pin Inserts
The five positions (W, X, Y, Z
and Normal) differ in degree
of rotation for various sizes and
arrangements.
Part Ordering Guide - RT & RTHP Series Plugs & Receptacles
Note: Higher salt spray resistance (200/500h) upon request.