Datasheet

ManualsBrandsAmphenol Military and Aerospace ManualsCircular ConnectorsCable plug 8P

62IN SERIES

AMPHENOL

Page Contents

1 Introduction

2 General description

3 Insert orientations

4 Key / Keyway orientations

5 Insert arrangements

6-10 Connector styles

11 Dust covers

12-14 Accessories

15 Back-Shell

16 Specials and deviations

Introduction

Amphenol 62IN series connectors are general purpose, environment

resistant, miniature circular connectors with three-point bayonet-coupling

and five-key polarisation. Designed to meet the requirements of MIL-

C-26482, Series I solder type, these connectors are widely used in

applications calling for quick disconnect connectors.

62IN connectors are intermateable and interchangeable with all MIL-

C-26482 connectors, whether solder or crimp type. These connectors

are used worldwide in military and industrial applications and are

available in a variety of sizes, styles and configurations.

Amphenol 62IN series connectors are also approved to Indian

Defence Standard Joint Services Specification

JSS50813

, certified by

the Electronic Components Standardisation Organisation (LCSO),

Bangalore, India.

Ordering 62IN series connectors

Summary of content (20 pages)

PAGE 1
62IN SERIES Introduction Amphenol 62IN series connectors are general purpose, environment resistant, miniature circular connectors with three-point bayonet-coupling and five-key polarisation. Designed to meet the requirements of MILC-26482, Series I solder type, these connectors are widely used in applications calling for quick disconnect connectors. 62IN connectors are intermateable and interchangeable with all MILC-26482 connectors, whether solder or crimp type.
PAGE 2
62IN SERIES General description Amphenol 62IN series miniature circular bayonet-coupled solder connectors meet the most critical application needs. Design versatility and high reliability performance make this series ideal for environmental sealing. Shell Shell hardware is manufactured from aluminium alloy and cadmium plated with an olive drab chromate finish. This finish has excellent conductivity; it is non-reflecting and corrosion resistant.
PAGE 3
62IN SERIES Insert orientations C C C A A A B B B Normal position of insert with pin contacts Alternate position of insert with pin contacts ( clockwise) Alternate position of insert with socket contacts ( counterclockwise) Each diagram shows mating face of insert Orientation Angles in degrees Insert arrangement W X Y Z 8-2 58 122 - - 8-3 60 210 - - 8-4 45 - - - 8-33 90 - - - 10-2 - - - - 90 - - - 10-7 - - - - 10-8 - - - - 12-3 - - 180 - 12-8 9
PAGE 4
62IN SERIES Key / Keyway orientations C A B Angles in degrees Shell size N B C E - F N B C E F N B C E F N B C E F 8 105 - 118 82 35 - - 30 50 75 - - 100 75 50 - - 30 45 10 105 85 125 115 85 35 35 35 30 50 75 75 75 100 75 50 50 50 30 45 12 105 89 121 115 85 35 35 35 30 50 75 75 75 100 75 50 50 50 30 45 14 105 91 119 75 120 35 35 35 30 50 75 75 75 100 75 50 50 50 30 35 16 105 93 117 75 120 35 3
PAGE 5
62IN SERIES Contact Legend Insert arrangements Symbol Contact size Front face of pin insert or rear of socket insert illustrated B C A A B B A C A D A F C B B A F B 8-2 I 2 20 8-3 I 3 20 E G H A A H F B B L E F C D Insert arrangement Service rating Number of contacts Contact size D E N 12-8 I 8 20 12-10 I 10 20 A G B H L C F P Y X K J H 16-8 II 8 16 Insert arrangement Service rating Number of contacts Contact size b M d Y L c X K F G H 20-27 I 27
PAGE 6
2IN SERIES Connector styles Wall mounting receptacles L C D Y G F E B Without termination assemblies Shell size B C D All dimensions in mm F E Dia G Dia L Y Dia X threads in inches 8 1.58 20.75 15.09 3.05 11.30 11.02 24.84 12.02 10 1.58 23.93 18.26 3.05 11.30 14.17 24.84 14.99 9/16-24 NEF 12 1.58 26.32 20.63 3.05 11.30 17.35 24.84 19.05 11/16-24 NEF 14 1.58 28.70 23.10 3.05 11.30 20.52 24.84 22.23 13/16-20 UNEF 16 1.58 31.07 24.61 3.05 11.
PAGE 7
62IN SERIES Connector styles Box mounting receptacles L L C F Y G Y G F K D J B E H A B A Style 12E(219) film wire terminations Style 12E solder All dimensions in mm Shell B C D E size F G Y Dia Dia 11.02 14.17 17.35 20.52 23.70 26.85 12.02 14.99 19.05 22.23 25.40 28.58 Dia Style 12E A L 20.32 20.32 20.32 20.32 20.32 20.32 24.84 24.84 24.84 24.84 24.84 24.84 Style 12E(219) A H min K J max min L max 8 10 12 14 16 18 1.58 1.58 1.58 1.58 1.58 1.58 20.75 23.93 26.
PAGE 8
621N SERIES R N S C sq A max N F K B L A/F 621N - 57T Single hole mounting with threaded shell to accept accessories X Y G M All dimensions in mm Shell Size 08 10 12 12 16 18 20 22 24 A B C max +0.05 (+0.13) max sq. 0.978 24.84 0.978 24.84 0.978 24.84 0.978 24.84 0.978 24.84 0.978 24.84 1.048 26.62 1.048 26.62 1.048 26.62 0.117 2.97 0.117 2.97 0.117 2.97 0.117 2.97 0.117 2.97 0.117 2.97 0.148 3.76 0.148 3.76 0.148 3.76 0.942 23.93 1.067 27.10 1.255 31.88 1.380 35.05 1.505 38.23 1.
PAGE 9
62IN SERIES Connector styles L C Cable mounting receptacles F B X Without termination assemblies Shell size All dimensions in mm B C F L X thread in inches 7/16-28 UNEF Y Dia 8 2.39 20.75 10.54 24.84 12.03 10 2 .3 9 2 3 .9 3 10.54 2 4 .8 4 1 4 .9 9 9 /1 6 - 2 4 N E F 12 2 .3 9 2 6 .3 2 10.54 2 4 .8 4 1 9 .0 5 11 / 1 6 -2 4 N E F 14 2 .3 9 2 8 .7 0 10.54 2 4 .8 4 2 2 .2 3 1 3 /1 6 - 2 0 U N E F 16 2 .3 9 3 1 .0 7 10.54 2 4 .8 4 2 5 .
PAGE 10
621N SERIES Connector styles 16 L C X Without termination assemblies All dimensions in mm Shell C size Dia 8 19.05 24.79 7/16-28 UNEF 10 21.82 24.79 9/16-24NEF 12 26.19 24.79 11/16-24 NEF 14 29.36 24.79 13/16-20 UNEF 16 32.54 24.79 15/16-20 UNEF 18 35.33 24.79 11/16-18 NEF 20 38.89 26.79 1 3/16-18 NEF 22 42.06 26.79 1 5/16-18 NEF 24 45.14 26.
PAGE 11
62IN SERIES Metallic dust covers Standard is olive drab chromate finish over cadmium plating with straight knurling. To order add suffix -XX to required style, where XX specifies shell size. It is strongly recommended that these are fitted to provide protection when connectors are not in use. For alternate finishes or dust covers with heavy duty ribs, contact factory for further details and part number. Dust cap with Nylon cord is also available. Contact factory for further details.
PAGE 12
62IN SERIES Accessories Strain relief clamp with grommet 62IN-585-XX-XXS or XXP (Replace XX-XX with the required insert arrangement) A G H All dimensions in mm Shell size A max G max H max 8 25.17 21.03 4.09 10 25.17 22.63 4.90 12 25.17 25.81 8.05 14 24.51 28.98 9.65 16 28.07 30.56 12.83 18 28.07 36.22 16.00 20 32.64 36.22 16.00 22 32.64 39.80 19.18 24 34.88 44.07 20.
PAGE 13
62IN SERIES 62IN - SQ Adaptors For Shielded Cables L INK MARK A CONN. NO. & BATCH CODE AS PER BOM. 3.5 ‘SW’ C D THD. G V KNURLED NUT. COUPLING NUT. RETAINER RING. CABLE HOUSING. L +0.5 -0.0 SW MAX. -0.2 RECOMME NDED TORQUE’S (Nm) 20 16 36 18 4 +0.50 9.2 23 18 36 21 6 +0.50 11/16 -24 12.2 27 22 36 24 8+1.0 - 62IN-14-SQ 13/16 -20 15.2 30 25 37 28 16 62IN-16-SQ 15/16 -20 18.3 33 28 31 18 62IN-18-SQ 1 1/16 -18 20.
PAGE 14
62IN SERIES Accessories Flange mounting gasket 62IN-760-XX (Replace XX with the required shell size) All dimensions in mm Shell size D E F Dia G Dia H max 8 20.62 15.08 12.90 3.30 1.06 10 23.82 18.26 16.07 3.30 1.06 12 26.18 20.65 19.25 3.30 1.06 14 28.57 23.01 22.42 3.30 1.06 16 30.96 24.61 25.60 3.30 1.06 18 33.32 27.00 28.77 3.30 1.06 20 36.52 29.36 31.95 3.30 1.06 22 39.70 31.75 35.13 3.30 1.06 24 42.87 34.92 38.30 3.96 1.
PAGE 15
62IN SERIES Shrink Boot Adaptor ‘V’ THREAD ‘A’ 3.56/3.50 ‘D’ ‘B’ 10.80 MAX. INK MARK A CONN. NO. AS PER BOM. 28.58 MAX. A B MAX. MIN. C + 0.0 - 0.51 08 15.67 6.35 10 18.64 12 21.79 SHELL SIZE ‘C’ D + 0.20 - 0.0 ‘V’ THREAD UNEF-2B CONNECTORS P/NO. 13.54 7 / 16” -28 M85049 / 60-1-W-8-IN 9.02 15.37 9 / 16” -24 M85049 / 60-1-W-10-IN 12.47 19.66 11 / 16” -24 M85049 / 60-1-W-12-IN 1.12 14 24.99 14.35 21.29 13 / 16” -20 M85049 / 60-1-W-14-IN 16 28.24 17.53 24.
PAGE 16
62IN SERIES Specials Industrial version crimp contacts 62IN series connectors are also available with rear release crimp contacts for industrial applications. These contacts can be crimped to wires outside the connector and then inserted into place with the help of designated tools. Connector maintenance is simplified because damaged contacts can be removed by using the designated removal tool and replaced with a new contact. Spare contacts are also available.
PAGE 17
62IN SERIES Ordering 62IN series connectors To obtain a specific connector number, write down the connector number from the typical example below. Only inserts shown on page 5 can be specified. Connectors are delivered with protective dust caps. Deviations specified on page 15 must be included at the end of the connector number whenever required.
PAGE 18
62IN SERIES Notes Notice: All information, including illustrations given herein is believed to be accurate at the time of printing. In lieu of design advances, Ampheno; reserves the right to change specifications without notice. This publication ACR 01-04-2005 supersedes all existing Amphenol literature on 62IN series connectors. Rev.
PAGE 19
62IN SERIES Notes 19 AMPHENOL
PAGE 20
62IN SERIES Notes AMPHENOL 20