Datasheet

ManualsBrandsAMPHENOL ManualsD-SUB ConnectorsD-SUB pin strip 180 ° Number of pins: 15 Screws 1 pc(s)

APPLICATIONS

The Amphenol Screw Termination

D’Sub series is especialy designed for

field applications.

These new connectors permit easy

wiring without any specific tool :

Just a standard electrician’s screwdriver

is required.

Due to their reduced overall

dimensions, these connectors are

compatible with all standard hoods

and accessories

• Industry

control of speed variators,

calculators…

• Houses and public buildings

control of heating, air

conditionning, lighting,

shutters, fire safety…

• Infrastructures

fluids control, motorway

tolls, street lighting...

CHARACTERISTICS

D-ST

E210/A

Simplify

your cable

assemblies !

Simplify

your cable

assemblies !

Screw Termination D’Sub series

D-ST

Materials and platings

Shells Steel Tin plated

Insulator Glass filled thermoplastic, UL94V-0

Contacts Machined brass, full gold

Electrical Data

Current rating 7,5 A max

Voltage rating 300 V RMS at 50 Hz

Withstanding voltage 1000 V RMS at 50 Hz

Insulation resistance > 5000 MΩ at 500 V DC

Contact resistance < 5 mΩ

Climatic Data

Operating temperature - 55°c to + 85°c, peack at 125°c

Damp heat 21 days ( 40°c - 95% HR )

Salt spray 48 hours

Mechanical Data

Cable type Solid or stranded

Cable gage 0,75 mm

max ( AWG 18 ) - For

bigger wire, please consult factory

Screw torque 0,05 mN max

Mating cycles 100 (classe II) or 500 (classe I)

DESCRIPTION

D-ST - VA 21/11/00 14:20 Page 2

Summary of content (4 pages)

PAGE 1
21/11/00 14:20 Page 2 D-ST Materials and platings Shells Insulator Contacts Steel Tin plated Glass filled thermoplastic, UL94V-0 Machined brass, full gold DESCRIPTION CHARACTERISTICS Screw Termination D’Sub series Electrical Data Current rating Voltage rating Withstanding voltage Insulation resistance Contact resistance 7,5 A max 300 V RMS at 50 Hz 1000 V RMS at 50 Hz > 5000 MΩ at 500 V DC < 5 mΩ The Amphenol Screw Termination D’Sub series is especialy designed for field applications.
PAGE 2
1/11/00 14:20 Page 3 OVERALL DIMENSIONS D-ST - VA Cable stripping A SIZE B +0,25 ( ,010" ) 0 -0,25 ( ,010" ) -0,2 ( ,008" ) C D E +0,2 ( ,008" ) +0,1 ( ,004" ) +0,1 ( ,004" ) 0 -0,1 ( ,004" ) -0,4 ( ,016" ) 9 30.7 ( 1.209" ) 16.4 ( .646" ) 16.8 ( .661" ) 25 ( .984" ) 19.4 ( .370" ) 15 39 ( 1.535" ) 24.8 ( .976" ) 25.1 ( .988" ) 33.3 ( 1.311" ) 27.7 ( 1.091" ) 25 52.9 ( 2.083" ) 38.5 ( 1.516" ) 38.8 ( 1.528" ) 47 ( 1.850" ) 41.4 ( 1.630" ) 37 69.2 ( 2.724" ) 54.9 ( 2.
PAGE 3
Page 4 How to order 717D E09 Classe II: 77D 717D Female connector Male connector, shells with dimples Classe I: 177D 777D Female connector Male connector, shells with dimples Size and number of contacts Type of contact: Contact termination: P ST 1 HOW TO ORDER 21/11/00 14:20 E09, A15, B25, C37 P = Male S = Female ST = Screw termination Kit connector + hood option: (See following description) 1 = DPPK 2 = DSSK 3 = DTZK 4 = DVZK hood hood hood hood Plastic hoods DPPK Straight cable entry
PAGE 4
21/11/00 14:20 Page 1 MÉDIASQUARE (33) 01 46 31 36 36 Memo Do not hesitate to contact us for further information BP 349 39105 Dole Cedex – France Fax : 33 (0) 3 84 82 94 11 Technical support Tel. : 33 (0) 3 84 82 94 00 The information given in this document are as a guideline only. We reserve the right to modify our products in any way we deem necessary. Any duplication is prohibited, unless approved in writing.