Datasheet
APPLICATIONS
The Amphenol Screw Termination
D’Sub series is especialy designed for
field applications.
These new connectors permit easy
wiring without any specific tool :
Just a standard electrician’s screwdriver
is required.
Due to their reduced overall
dimensions, these connectors are
compatible with all standard hoods
and accessories
• Industry
control of speed variators,
calculators…
• Houses and public buildings
control of heating, air
conditionning, lighting,
shutters, fire safety…
• Infrastructures
fluids control, motorway
tolls, street lighting...
CHARACTERISTICS
D-ST
E210/A
Simplify
your cable
assemblies !
Simplify
your cable
assemblies !
Screw Termination D’Sub series
D-ST
Materials and platings
Shells Steel Tin plated
Insulator Glass filled thermoplastic, UL94V-0
Contacts Machined brass, full gold
Electrical Data
Current rating 7,5 A max
Voltage rating 300 V RMS at 50 Hz
Withstanding voltage 1000 V RMS at 50 Hz
Insulation resistance > 5000 MΩ at 500 V DC
Contact resistance < 5 mΩ
Climatic Data
Operating temperature - 55°c to + 85°c, peack at 125°c
Damp heat 21 days ( 40°c - 95% HR )
Salt spray 48 hours
Mechanical Data
Cable type Solid or stranded
Cable gage 0,75 mm
2
max ( AWG 18 ) - For
bigger wire, please consult factory
Screw torque 0,05 mN max
Mating cycles 100 (classe II) or 500 (classe I)
DESCRIPTION
D-ST - VA 21/11/00 14:20 Page 2