Information
12
www.sineco.com
Optional - Contact and Wedge Removal Tool
P/N: ATRT-100
3. Push contact straight into connector
until a ‘click’ is felt. A slight tug will
conrm placement.
3. Use the same athead screwdriver to
remove contact inside connector.
2. Twist the athead screwdriver until
wedge ‘pops’ out of connector.
4. Insert wedge into connector. 5. A ‘click’ will be felt when the wedge is
fully installed.
1. Remove wedge by inserting a athead
screwdriver head underneath the lip
of the wedge.
2. Hold connector with rear grommet
facing you.
1. Grasp crimped contact approx. one
inch behind the contact barrel.
Plug Assembly - Contact and Wedge Insertion
Plug Assembly - Contact and Wedge Removal