Information

13
www.sineco.com
1. Grasp crimped contact approx. one
inch behind the contact barrel.
2. Hold connector with rear grommet
facing you.
3. Push contact straight into receptacle
until a ‘click’ is felt. A slight tug will
conrm placement.
4. Insert wedge into receptacle.
3. Remove wedge.2. Pull until wedge ‘pops’ out of
receptacle.
1. Remove wedge by inserting a hook
into an opening of the wedge.
5. A ‘click’ will be felt when the wedge is
fully installed.
Receptacle Assembly - Contact and Wedge Insertion
Receptacle Assembly - Contact and Wedge Removal
AT Series
Connectors