Amphenol H4 Assembly Instructions

Amphenol Industrial Operations Amphenol Industrial Operations Europe Amphenol Middle East Enterprises FZE Amphenol Technology Shenzhen Ltd
40-60 Delaware Avenue Via Barbaiana 5 Office C-37 PO Box 21107 Block 5 Fuan 2nd Industrial Park, Dayang Rd
Sidney, NY 13838-1395 I-20020 Lainate (MI) Ajman Free Zone Fuyong Town, Baoan, 518103 Shenzhen
USA ITALY UAE CHINA
Tel: [phone] Tel: [phone] Tel: [phone] Tel: [phone]
Fax: [phone] Fax:[phone] Fax:[phone] Fax:[phone]
1
H4 ASSEMBLY INSTRUCTIONS ENGLISH REV3 –OCTOBER 2014
AMPHENOL HELIOS H4 ASSEMBLY INSTRUCTIONS
If, during self assembly, parts and tools other than those stated by Amphenol are used or if the preparation and assembly
instructions described here are disregarded then neither safety nor compliance with the technical data can be guaranteed.
For protection against electric shock, PV-connectors must be isolated from the power supply while being assembled or
disassembled. The end product must provide protection from electric shock.
Unplugging under load: PV plug connections must not be unplugged while under load. They can be placed in a no load state by
switching off the DC/AC converter or breaking the DC circuit interrupter. Plugging and unplugging while under voltage is
permitted.
It is unadvisable to use non-tinned cables type H07RN-F, since with oxidized copper wires the contact resistances of the crimp
connection may exceed the permitted limits.
Disconnected connectors should be protected from dirt and water with sealing caps.
Touch protection, mated/unmated IP68/IP2X
Rated current 40A (2,5mm²/14AWG)/48A (4mm²/10AWG)/56A (6mm²/10AWG)/60A (10mm²)
Ambient temperature range -40° ...+90°C
Rated voltage 1500V (IEC/CEI) and 1000V (UL)
Upper limiting temperature 120°C (IEC/CEI)
Safety class II
NEC 2008/690.33 YES
Certification UL E339277
Certification TUV R50157783/R72131001