User and Installation Guide microFIDELITYTM Digital Audio Amplifier Model 100
Contents Unpacking ............................................................................. 3 Connecting in Stereo configuration ....................................... 4 Connecting on Mono configuration ....................................... 6 Technical specifications ........................................................ 8 Safety information ................................................................ 9 Your warranty ......................................................................
User and Installation Guide Unpacking: Check that this package contains: - one digital audio amplifier - Model 100 - one large AC adapter (wallwart) Thank you for purchasing this high-quality digital audio amplifier product. This amplifier contains advanced audio amplification technology which provides the audio quality of analog amplifiers at a superior signal-to-noise ratio and low audio distortion while at the same time offering extremely small size and high power efficiency.
User and Installation Guide Connecting in Stereo configuration Set Mono/Stereo switch to Stereo Digit a l Amplifier Model 1 100 24 V M/S L/M R Amplifier Outlet DC 24 V 1000 mA LINE OUT L AC adapter Page 4 R Audio Source
User and Installation Guide Observe the correct cable polarity when connecting the speakers.
User and Installation Guide Connecting in Mono configuration Set Mono/Stereo switch to Mono Digit a l Amplifier Model 1 100 24 V M/S L/M R Amplifier Outlet DC 24 V 1000 mA LINE OUT AC adapter Page 6 Audio Source
User and Installation Guide ATTENTION! Never short circuit any amplifier speaker output since this may damage the amplifier! Amplifier Speaker Page 7
User and Installation Guide Technical Specifications Output power: Mono: 1 x 50 W (peak), 1 x 30 W (rms) Stereo: 2 x 20 W (peak), 2 x 15 W (rms) Dynamic range / signal-to-noise ratio: Mono: 115 dBA Stereo: 112 dBA Frequency response: 1 Hz - 70 kHz @ 8 Ohms Total harmonic distortion (THD+N): Mono: 0.05 % @ 25 W, 1 kHz Stereo: 0.
User and Installation Guide READ THESE SAFETY INSTRUCTIONS CAREFULLY AND HEED ALL WARNINGS IN THIS MANUAL. POWER SOURCE To avoid product malfunction, and to protect against electric shock, fire or personal injury, please observe the following: • This product has been designed to work with 120-volt AC current using the supplied AC adapters. Connection to a line voltage other than that or use of non-compatible AC adapters may create a safety and fire hazard and may damage the product.
User and Installation Guide CARE • Do not place any object containing water or other liquids on this product. • Do not open the cabinet. Touching parts inside the cabinet could result in electric shock and damage to the product. NON-USE PERIODS • When the product is not being used for a long period of time, unplug the product. CLEANING • Unplug the product before cleaning. • When the system gets dirty, wipe it with a clean, soft cloth.
Limited warranty WHAT YOUR WARRANTY COVERS This warranty extends only to the original user of the equipment (“you”, ”your”) and is limited to the purchase price of each part. Amphony and its affiliated companies (”we”, ”our”, ”us”) warrant this Wireless Transmitter / Amplifier Set against defects in materials or workmanship as follows.
LEGAL LIMITATIONS REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS YOUR EXCLUSIVE REMEDY. WE SHALL NOT BE HELD LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESSED OR IMPLIED WARRANTY ON THIS EQUIPMENT, NOR FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF, OR INABILITY TO USE, THIS EQUIPMENT. UNDER NO CIRCUMSTANCES SHALL OUR LIABILITY, IF ANY, EXCEED THE PURCHASE PRICE PAID FOR THIS EQUIPMENT, EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW.
