Installation guide

User and Installation Guide
Page 10
RR
Copyright (C) 2004 Amphony. All rights reserved.
The information contained herein is subject to change without notice.
Revisions may be issued to advise of such changes and/or additions.
All product names, trade names, or corporate names mentioned in this
document are acknowledged to be the proprietary property of the registered
owners.
FCC ID PMJT1500
This device complies with part 15 of the FCC Rules. Operation is subjected
to the following two conditions: 1) This device may not cause harmful
interference and 2) this device must accept any interference received,
including interference that may cause undesired operation.
Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
User and Installation Guide
Page 1
RR
Step 1Step 1
Connecting the transmitter
The transmitter connects either to a standard line-out audio interface via the
supplied RCA cable or to an amplified speaker output via the supplied short
speaker cables.
If the transmitter is connected via speaker cables, observe the polarity of the
cable connection to ensure that the transmitter will be fed with a correct
polarity signal. If one of the cables is switched (reversed), one speaker will
receive an opposite polarity signal which will degrade sound performance.
The transmitter can also be connected to other audio outputs by using an
appropriate adapter.
Connect the supplied small AC adapter’s barrel-shaped plug into the DC 9V
jack, and then plug the transformer into a standard AC outlet. We recommend
the use of a surge protector to protect the transmitter from power surges.
Unpacking: Check that this package contains:
One 5.8 GHz Digital Audio transmitter - Model 1520, one Digital Audio
amplifier - Model 1520, one small and one large AC adapter (wallwart), two
short speaker cables, one RCA audio cable.
READ THESE SAFETY INSTRUCTIONS CAREFULLY AND HEED ALL
WARNINGS IN THIS MANUAL.
POWER SOURCE
To avoid product malfunction, and to protect against electric shock, fire or personal
injury, please observe the following:
• This product has been designed to work with 120-volt AC current using the supplied
AC adapters. Connection to a line voltage other than that or use of non-compatible
AC adapters may create a safety and fire hazard and may damage the product.
• Do not run power cords under rugs or carpets or place heavy objects on them.
• Damaged or deformed power cords are hazardous and should be replaced
immediately by a qualified service technician.
LOCATION
• Do not use this product outdoors or in cars.
• Air vents are provided at the bottom of the amplifier to prevent excessive tempera-
tures inside the unit. Do not place the amplifier in closed spaces, cover it, or otherwise
block the vents.
• Do not place this product in direct sunlight, or near heat sources.
• Keep this product away from strong magnetic objects.
VOLUME CONTROL
• Do not turn up the volume while listening to a portion with very low level input or no
audio signal to avoid damage to your speakers during a peak level audio portion.
• Turn the amplifier volume control to minimum prior to connecting or disconnecting the
transmitter or amplifier and prior to switching audio sources as this may cause loud
clicks which can damage your speakers.
CARE
• Do not insert or drop anything into the amplifier through the air vents as this could
cause serious damage, possibly resulting in fire.
• Do not place any object containing water or other liquids on this product.
• Do not remove the cabinet. Touching parts inside the cabinet could result in electric
shock and damage to the product.
NON-USE PERIODS
• When the product is not being used for a long period of time, unplug the product.
CLEANING
• Unplug the product before cleaning.
• When the system gets dirty, wipe it with a clean, soft cloth. If necessary, wipe it with a
soft cloth, slightly dampened with soapy water. Wipe dry immediately with a dry cloth.
• Never use benzene, aerosol cleaners, thinner, alcohol or any volatile cleaning agent.
• Do not use abrasive cleaners, as they may damage the finish.
SERVICE
• Do not open the cabinet of any components. Opening the cabinets may present a
shock hazard, and any modification to this product will void your warranty.
• Do not attempt to service the unit yourself. If liquid or any metal objects such as paper
clips, wire or staples accidentally fall inside, disconnect the product from the power
source immediately, and consult an authorized service center.
• Please refer any service to an authorized Amphony service center.
IMPORTANT SAFETY INFORMATION
ATTENTION!
Do not use both the speaker cables and RCA cable. Do not connect
speakers to the transmitter. Do not connect the large AC adapter to
the transmitter.
ATTENTION!