User and Installation Guide Guide d’Utilisateur et d’Installation 5.8 GHz DIGITAL Wireless Speaker Kit 5.
EN - Contents Unpacking ....................................................................................... 2 Connecting the transmitter .............................................................. 2 Connecting the amplifiers ............................................................... 4 Placing the transmitter and amplifiers ............................................. 5 Operating the transmitter ................................................................ 6 Operating the amplifiers .........
User and Installation Guide R Unpacking: Check that this package contains: One 5.8 GHz Digital Audio transmitter - Model 1550, two 5.8 GHz Digital Audio amplifiers - Model 1550, one small and two large AC adapters (wallwarts), four short speaker cables, one RCA audio cable. S t e p 1Connecting the transmitter The transmitter connects either to a standard line-out audio interface via the supplied RCA cable or to an amplified speaker output via the supplied short speaker cables.
R User and Installation Guide Using the transmitter RCA audio input: L DC 9V R L R Transmitter AC adapter DC 9 V 250 mA AUDIO LINE OUT L Power outlet R Audio Source Using the transmitter speaker audio input: L DC 9V R L R Transmitter AC adapter DC 9 V 250 mA L R SPEAKER OUT Power outlet Audio Source Page 3
R User and Installation Guide Connecting the amplifiers S t e p 2 Connect the DC power input of the amplifier with the supplied large 24 V AC adapter (wallwart). ATTENTION: Connect the amplifier to the AC adapter BEFORE connecting the AC adapter to the power outlet to avoid sparks due to rush-in current. Each amplifier connects to regular passive loudspeakers via the supplied speaker cable. Observe the correct polarity when connecting the speakers. Connect the left speaker to the amplifier marked “LEFT”.
R User and Installation Guide Placing the transmitter and amplifiers S t e p 3 For best reception, we recommend that each amplifier be placed within the line of sight from the transmitter. If possible, each amplifier should be placed right side up with its front toward the transmitter. The transmitter should be placed at an elevation such that there are no obstacles between the transmitter and amplifiers (line of sight) in an area where there will be the least amount of traffic.
R User and Installation Guide Operating the transmitter S t e p 4 After powering up the transmitter, the transmit light will go on for approximately five seconds while the transmitter initializes. After initialization, the transmit light will go out. Initially, set the transmitter volume control to a middle setting. Once audio is detected at the audio input, the transmit light will go on and the transmitter will transmit the audio signal.
R User and Installation Guide Operating the amplifiers S t e p 5 As soon as a valid transmitter signal is received by the amplifiers, the amplifiers will output the amplified audio signal to the speaker outputs. The amplfier marked “LEFT” will output the left audio channel and the amplifier marked “RIGHT” will output the right channel. You can change the audio level by adjusting each amplifier volume control.
R User and Installation Guide Troubleshooting Problem Possible Cause The transmit light does not go on after DC power is applied to the transmitter The transmit light goes out after a few seconds and does not light again Faulty AC adapter Check the power outlet and or faulty power outlet the AC adapter; if possible, check for correct voltage of the AC adapter. No audio present at Check the audio connection audio input to the transmitter and ensure that there is audio present.
R User and Installation Guide Problem Possible Cause Solution Audio drops out intermittently or crackles Strong interference In some cases, there may be strong interference preventing proper reception of the audio signal which can be caused by 5.8 GHz cordless telephones or 5.8 GHz wireless networks. Either eliminate the interference, locate the base unit of the cordless phone in another room, set the wireless network to use the 5.1 GHz frequency band rather than 5.
User and Installation Guide Technical Specifications Transmitter: Audio transmission method: Digital Transmitter frequency: 5.8 GHz Error correction: 1/2 rate FEC Audio sampling method: 128 times oversampling Transmitted data rate: > 3 Mbps Transmitter operating range: max. 200 ft. line of sight, max. 50 ft.
R User and Installation Guide IMPORTANT SAFETY INFORMATION ATTENTION! READ THESE SAFETY INSTRUCTIONS CAREFULLY AND HEED ALL WARNINGS IN THIS MANUAL. POWER SOURCE To product malfunction, and to protect against electric shock, fire or personal injury, please observe the following: • This product has been designed to work with 120-volt AC current using the supplied AC adapters.
Limited warranty WHAT YOUR WARRANTY COVERS This warranty extends only to the original user of the equipment (“you”, ”your”) and is limited to the purchase price of each part. Amphony and its affiliated companies (”we”, ”our”, ”us”) warrant this Wireless Transmitter / Amplifier Set against defects in materials or workmanship as follows.
Guide d’Utilisateur et d’Installation Déballage: Vérifiez que ce paquet contient: Un Transmetteur Audio Numérique à 5.8 GHz – Modèle 1550, deux amplificateurs Audio Numériques a 5.8 GHz, Model 1550, un petit et deux grands adaptateurs de courant électrique, quatre courts câbles à hautparleurs.
R Guide d’Utilisateur et d’Installation Utilisez les données audio RCA du transmetteur: L DC 9V R L R Transmetteur DC 9 V 250 mA AUDIO LINE OUT L Prise de courant R Source Audio Utilisez les données audio haut-parleur du transmetteur: L DC 9V R L R Transmetteur DC 9 V 250 mA L R SPEAKER OUT Source Audio Page 14 Prise de courant
R Guide d’Utilisateur et d’Installation 2 e m e é t a p e Branchement des Amplificateurs Branchez le courant d’alimentation de chaque amplificateur avec le grand adaptateur 24V AC fourni. L’utilisation d’un parasurtenseur est recommandé afin de protéger les amplificateurs contre les surtensions de courant pouvant nuire les amplificateurs et les haut-parleurs ou causer des coupures de son. Chaque amplificateur se branche à un haut-parleur passif avec un des câbles à haut-parleur fourni.
R Guide d’Utilisateur et d’Installation 3 e m e é t a p e Emplacement du transmetteur et des amplificateurs Pour la meilleure réception, nous recommandons que chaque amplificateur soit aligné directement vers le transmetteur. Si possible, chaque amplificateur devrait être placé du côté verso et vers le transmetteur.
R Guide d’Utilisateur et d’Installation 4 è m e é t a p e Fonctionnement du transmetteur Après avoir branché le transmetteur, la lumière de transmission s’allume pour environ cinq secondes durant l’initialisation. Après l'initialisation, la lumière s’éteint. Au début, réduisez le volume au mi-niveau. Lorsque l’audio est détectée par le transmetteur, la lumière de transmission s’allume et transmet le signal audio.
R Guide d’Utilisateur et d’Installation 5 è m e é t a p e Fonctionnement des amplificateurs Aussitôt qu’un signal valide est reçu par les amplificateurs, ces derniers émettront une sortie audio amplifiée aux sorties des haut-parleurs. L’amplificateur marqué « GAUCHE » émettra la sortie audio de la chaine gauche et l’amplificateur « DROIT » émettra la chaine droite. Vous pouvez changer le niveau audio en ajustant le volume à chaque amplificateur.
Guide d’Utilisateur et d’Installation R Tableau de problèmes/solutions PROBLÈME Aucune lumière ne s’allume après avoir branché le transmetteur dans l’alimentation de courant La lumière du transmetteur s’éteint après quelques secondes et ne se rallume pas Manque de son dans les amplificateurs L’Audio est distordue RAISON POSSIBLE L’Adaptateur d’alimentation est défectueux ou la prise de courant est défectueuse SOLUTION Vérifiez la prise d’alimentation et l’adaptateur.
Guide d’Utilisateur et d’Installation PROBLÈME L’Audio coupe par intermittence ou grésille RAISON POSSIBLE Fortes interférences L’Alimentation est instable L’audio est lourd Fortes interférences Le volume du transmetteur est réglé au minimum Le signal audio est trop faible La portée du transmetteur est très courte Page 20 Fortes interférences Trop d’obstacles R SOLUTION Dans certains cas, il peut y avoir de fortes interférences causées par d’autres sources ayant un signal à 5.
Guide d’Utilisateur et d’Installation R Spécifications technique Transmetteur: Transmission audio: Numérique Fréquence de transmission: 5.8 GHz Niveau de bruit: typ. 93 dB Correction d’erreur: 1/2 rate FEC Echantillonage audio: 128 times oversampling Taux de transmission données: > 3 Mbps Portée: Max. 60 m sans obstacle, max. 20 m à travers les murs Niveau d’entré max: 0.
Guide d’Utilisateur et d’Installation R INFORMATIONS DE SÉCURITE IMPORTANTES SOURCE D'ALIMENTATION Pour éviter que le produit mal fonctionne, et afin de protéger contre choc électriques, incendie, ou des blessures personnelles, veuillez s'il vous plait observer le suivant : • Ce produit a été conçu pour fonctionner avec un courant 120 volt utilisant les adaptateurs d'alimentation de courant fournis • Branchement à un voltage autre que celui-ci ou l'utilisation d'adaptateurs non-compatible peut créer un ri
GARANTIE LIMITÉE CE QUE VOTRE GARANTIE COUVRE Cette garantie limitée n’est pas transférable (« vous », « votre ») et est limitée au prix d’achat de chaque pièce. Amphony Corp. et ses compagnies affiliées (« nous », « notre ») garantissons ce amplificateurs sans fil est exempt de tout défaut ou vice de fabrication comme suit.