User's Manual
Table Of Contents
- Warnings and general precautions for safety
- Regulatory and safety notices
- Product description and intended use
- Remove the front cover
- Prepare for bead chain size #10, 4.5mm
- Prepare support wall for cord loop and small size bead chains
- Prepare for cord loop D30, K35, C30, 2.7-3.5mm
- Prepare for vertical blinds track cord, bead chain size #6 and size #8
- Mount device to wall
- Charing the battery
- Set limits
- Set favorite position
- Set speed
- Set energy mode
- Pair with Android or iOS app
- Remove pairing
- Reboot the device
- Factory reset
- Technical specifications
2021-v1-en, main user manual MOVE motor pro
13
Prepare for cord loop D30, K35, C30, 2.7-3.5mm
Use the support wall and the standard size pulley (marked 4 in the “All parts included” picture at page 5).
Install at cord loop D30, K35, C30, 2.7-3.5mm
After the support wall is installed the cord loop should be placed in the standard pulley. The standard pulley is then pressed
onto the motor axel and the supplied screw is used to secure the pulley. Then attach the small top part to make sure the cord is
always centered and aligned towards the pulley. Use the supplied screw to secure the small top part.