User's Manual
Table Of Contents
- Warnings and general precautions for safety
- Regulatory and safety notices
- Product description and intended use
- Remove the front cover
- Prepare for bead chain size #10, 4.5mm
- Prepare support wall for cord loop and small size bead chains
- Prepare for cord loop D30, K35, C30, 2.7-3.5mm
- Prepare for vertical blinds track cord, bead chain size #6 and size #8
- Mount device to wall
- Charing the battery
- Set limits
- Set favorite position
- Set speed
- Set energy mode
- Pair with Android or iOS app
- Remove pairing
- Reboot the device
- Factory reset
- Technical specifications
2021-v1-en, main user manual MOVE motor Pro
18
Charing the battery
MOVE devices charge the battery installed in them through a USB type B connector. The USB charger adaptor used must be rated
for at least 0.5A and 5V.
Set limits
Limits in MOVE device can either be set through the app or at the device through the display. Because MOVE device can be
installed in many ways there are an option to change direction in the set limit’s view.
Set open limit (position 0). This is the maximum open position.
Do this to set open limit:
1. Wake the device by clicking anywhere in the display
2. Click the settings icon in the top right corner of the display
3. Click the “Set open limit” option
4. Use the up and down arrow to set the desired open position. Use “switch direction” to invert the up and down button in
the display if needed
5. The position is automatically stored when the back arrow in the top left corner is clicked
Set closed limit (position 100). This is the maximum closed position.
Do this to set closed limit:
1. Wake the device by clicking anywhere in the display
2. Click the settings icon in the top right corner of the display
3. Click the “Set closed limit” option
4. Use the up and down arrow to set the desired open position. Use “switch direction” to invert the up and down button in
the display if needed
5. The position is automatically stored when the back arrow in the top left corner is clicked
Set favorite position
MOVE devices let the users set a favorite position. From the main view in the MOVE device display the favorite position have a
button with a heart icon. When this button is clicked the MOVE device will go to the favorite position. The favorite position can
easily be set in the settings menu.
To set the favorite position do this:
1. Wake the device by clicking anywhere in the display
2. Click the settings icon in the top right corner of the display
3. Click the “Set fav position” option
4. Use the drawbar to set the desired favorite position
5. The position is automatically stored when the back arrow in the top left corner is clicked