User's Manual
Table Of Contents
- Warnings and general precautions for safety
- Regulatory and safety notices
- Product description and intended use
- Remove the front cover
- Prepare for bead chain size #10, 4.5mm
- Prepare support wall for cord loop and small size bead chains
- Prepare for cord loop D30, K35, C30, 2.7-3.5mm
- Prepare for vertical blinds track cord, bead chain size #6 and size #8
- Mount device to wall
- Charing the battery
- Set limits
- Set favorite position
- Set speed
- Set energy mode
- Pair with Android or iOS app
- Remove pairing
- Reboot the device
- Factory reset
- Technical specifications
2021-v1-en, main user manual MOVE motor Pro
19
Set speed
MOVE devices let the users set different speed for opening and closing direction. The speed that is set will be used both when
manually adjusting position but also when automations change the position. The speed can easily be set in the settings menu.
To set the speed do this:
1. Wake the device by clicking anywhere in the display
2. Click the settings icon in the top right corner of the display
3. Click the “Set speed” option
4. Use the drawbar to set the opening speed
5. Use the drawbar to set the closing speed
6. Use the drawbar to test the speed. When testing speed, the user interface will be locked until the motor comes to a
complete stop
7. The speed is automatically stored when the back arrow in the top left corner is clicked
Set energy mode
MOVE devices let the users set different energy modes. The “Battery” mode is default and will make the device last for a long
time when powered by battery. The “Mains” option is intended to be used if a USB charger is plugged into the device
permanently. The “Main” option will keep the device active and quicker to respond to radio activities. App will connect faster if
at least one MOVE device in a mesh network is set to use the “Mains” energy mode. The energy mode can easily be set in the
settings menu.
To set the energy mode do this:
1. Wake the device by clicking anywhere in the display
2. Click the settings icon in the top right corner of the display
3. Click the “More settings” option
4. Click the “Set energy mode” option
5. Click on either “Battery” or “Mains”
6. The energy mode is automatically stored when the back arrow in the top left corner is clicked
Pair with Android or iOS app
MOVE devices can be controlled through a smartphone or tablet with an app. To be able to use an app the MOVE device must be
paired with that app.
Do this to pair:
1. Download and install the app from Google Play or Apple AppStore. QR code is in the product box lid.
2. Open the app
3. Click “Device” tab in the bottom tab bar of the app
4. Click the “+” icon in the top right corner of the app
5. Wake the MOVE device by clicking anywhere in the MOVE device display
6. Click the settings icon in the top right corner of the MOVE display
7. Click the “More settings” option in the MOVE display
8. Click the “Set pairing mode” option in the MOVE display
9. Click the “Search for mesh” option in the MOVE display
10. The app should now find and pair with the MOVE device. The steps that follow will be described in the app
Remove pairing
To remove pairing do this:
1. Wake the MOVE device by clicking anywhere in the MOVE device display
2. Click the settings icon in the top right corner of the MOVE display
3. Click the “More settings” option in the MOVE display
4. Click the “Set pairing mode” option in the MOVE display
5. Click the “Remove from mesh” option in the MOVE display. The device will remove itself from the pairing and then load
the main view