User's Manual
Table Of Contents
- Warnings and general precautions for safety
- Regulatory and safety notices
- Product description and intended use
- Remove the front cover
- Prepare for bead chain size #10, 4.5mm
- Prepare support wall for cord loop and small size bead chains
- Prepare for cord loop D30, K35, C30, 2.7-3.5mm
- Prepare for vertical blinds track cord, bead chain size #6 and size #8
- Mount device to wall
- Charing the battery
- Set limits
- Set favorite position
- Set speed
- Set energy mode
- Pair with Android or iOS app
- Remove pairing
- Reboot the device
- Factory reset
- Technical specifications
2021-v1-en, main user manual MOVE motor pro
7
Remove the front cover
To remove the front cover when the MOVE device is new use the red stickers attached to the device. Use both hands. One hand
should hold the sticker that is marked “hold”. The other hand should pull the sticker that is marked “pull”. These stickers
should be removed after installation.
If the red stickers are not present and the front cover should be removed a pulley need to be attached. One hand should hold
the pulley and the other should pull the front cover for it to pop off. Follow the steps bellow.
Step 1
Step 2
Step 3