User's Manual

2020-v1-en, main user manual MOVE remote
Note: Make sure to install batteries with the correct polarity orientation in the battery compartment
Note: Only use LR03/AAA batteries
Pic 2, Battery overview
1. Plastic cover
2. Batteries
To access the batteries, remove the plastic cover (pic 2, position 1) at the back side of the MOVE remote.
It is important to insert batteries of the correct type (LR03/AAA) with the correct orientation. Positive and negative
terminals are always marked at the batteries.
In the battery compartment, under the plastic cover the battery orientation (pic 2, position 2) and battery details
are molded into the plastic.
When batteries are running low the letter L will be shown by the indicator LED:s (pic 1, position 1).