User guide

Service Center

Recording a custom greeting

1. Press and hold the button until the recording tone

sounds. Continue holding down the button.

2. Start the greeting immediately after hearing the

tone. The display will show R1 during the recording.

Keep a distance of approximately six inches from the

microphone while recording. The display will  ash

during the last ten seconds available for recording to

indicate that recording time is nearly over.

3. Release the

button when  nished recording. The

greeting is played back automatically.

4. The display will show

R1 to indicate that the volume

for the custom message can be adjusted. Use the UP

VOLUME and DOWN VOLUME buttons to adjust the

volume.

Play back the custom greeting at any time by brie y

pressing the

button.

Deleting the custom greeting

1. Press and hold the button until the recording tone

sounds, and immediately release the button.

2. The pre-recorded standard greeting will play, indicating

that the custom greeting has been deleted.

ANSWERING MACHINE FUNCTIONS