User guide

1-866-AMPLICOM (267-5426)
11
Setting up the ring delay
Use the slide switch on the back of the answering machine
to set how many times the phone rings before incoming
calls are answered.
2 The call is answered after two rings.
6 The call is answered after six rings.
TS (Toll Saver) Incoming calls are answered after six
rings until the  rst new message has been recorded. Once
a message has been recorded the answering machine will
answer after approximately two rings.
Note: The Toll Saver function enables the user to check
remotely whether any new messages are available on
the answering machine without incurring a toll charge.
See “Toll-free remote pre-access” for more information.
General operation
Switch the answering machine off (standby) or on using
the
button. When the answering machine is off, the
display shows
-- for standby and no messages will be
recorded.
The maximum length for incoming messages is 120
seconds. If the caller speaks for longer, a signal tone
sounds and the call is cut off. If there is a pause of
ANSWERING MACHINE FUNCTIONS