CL100 User Guide
Contents Analog Alarm Clock Features........ 3 Clock Functions .............................. 9 Cordless Vibration Pad Features .. 4 Help and Support ......................... 12 Important Safety Instructions ...... 5 Troubleshooting Guide ................ 12 Included Equipment ....................... 6 Maintenance and Warranty ......... 13 Set Up .............................................. 6 Technical Details........................... 15 LED Display Notification ................
Clock Features CL100 Analog Alarm Clock Features 11 1 Snooze button/ 22 3 3 3 Alarm ON/OFF Alarm light/ incoming call light/Stop alarm 2 LED: Power ON/ OFF/Battery ON/OFF 4 Volume control 5 Set one of 5 44 acoustic signals 5 5 6 Pitch 66 7 Vibration and 77 88 15 15 9 9 14 14 10 10 Acoustics 8 Flashing lamp ON/OFF 9 Snooze delay 10 Clock 11 11 16 16 3 13 13 illumination 11 Telephone line socket 12 Power adapter socket 13 Vibration pad socket 14 Set alarm time 15 Set time 16 Battery
Clock Features CL100 Cordless Vibration Pad Features 1 LED: Alarm ON/ OFF/Battery charge low 1 2 Vibration pad ON/OFF 22 3 Battery compartment 4 Screws 33 for battery compartment 5 Connection cable socket 44 55 4 Service Center
Safety Important Safety Instructions Read this operating manual thoroughly. SAVE THESE INSTRUCTIONS Intended use This alarm clock is designed to provide an acoustic alarm or alert signal at a set time or on receipt of a telephone call. Any other use is considered unintended use. Unauthorized modification or reconstruction is not permitted. Do not open the device and attempt any repair work yourself.
Getting started Getting Started — Included Equipment • • • • • 1 Analog Alarm Clock 1 Power Adapter 1 Vibration Pad 1 Connector Cable for Vibration Pad 2XAAA, 500mA Ni-MH Rechargable Battery for Alarm Clock • • • • 3XAAA, 800mA Ni-MH Rechargeable Battery Pack for Vibration Pad Telephone Cord Operating Instructions Battery Compartment Cover Set up 1. Connecting the alarm clock i. Insert the supplied batteries in the clock’s battery compartment.
Getting started ii. Replace the battery compartment cover on the underside of the alarm clock. iii. Screw the battery compartment cover to the alarm clock housing. 2. Connect vibration pad and phone cord Connect the equipment as illustrated below: Vibration Pad Power Supply Telephone Line Important: To connect the alarm clock to a telephone connection for use as a signal amplifier, you may need an appropriate adapter.
Getting started Getting started LED Display Notification Alarm Clock Face The following functions are on the alarm clock face: Red: Alarm function is activated. Flashing Orange: Alarm function is activated, and battery charge is low. Vibration Pad The following functions are on the vibration pad: Flashing Green Every 2 Seconds: Vibration pad is on. Red: Vibration pad is charging. Flashing Red: Battery charge is low.
Clock functions Clock Functions Setting the clock Turn the set time rotary knob until the clock shows the correct time. Setting the alarm Turn the alarm time rotary knob until the clock shows the correct time for the alarm to trigger. Turning the alarm on/off Turn the alarm on/off rotary knob clockwise for On. Counterclockwise for Off. Setting the volume Caution: The volume/acoustic signal/pitch can only be modified if the alarm is on. If the alarm is off, those settings cannot be adjusted.
Clock functions Caution: Exposure to the alarm at full volume for a long period could cause ear damage. Selecting the acoustic signal Turn the acoustic signal rotary knob to required acoustic signal. Setting the pitch Turn the pitch rotary knob to set the pitch. It may be possible to detect higher or lower pitch tones even at low volumes. Setting the clock face illumination Slide the illumination switch to set clock face illumination.
Clock functions Setting the flashing light ON OFF Slide the switch to set the light in the snooze button to flash during an alarm. There are two settings available: (from left to right) On and Off. Setting the snooze delay 0m 5m 15m SNOOZE Slide the snooze delay switch to set the snooze delay. There are three settings available: (from left to right) 0 min, 5 min, or 15 min.
Help and support Help and support If you have problems with your device, please refer to the following information before calling for support. If you continue to have problems, please call the Service Center at 1-866-AMPLICOM (267-5426) for further assistance. Troubleshooting guide My clock does not work 1. The battery charge may be too low or no batteries have been inserted. 2. The clock may not be plugged in. My vibration pad does not work 1.
Maintenance and warranty Maintenance and Warranty Maintenance • • Please clean your equipment’s surfaces with a soft, lint-free cloth. Never use cleaning agents or solvents. Warranty AMPLICOM equipment is produced and tested according to the latest production methods. The implementation of carefully chosen materials and highly developed technologies ensure trouble free functioning and a long service life.
Maintenance and warranty If your equipment shows signs of defect during the period of warranty, please return to the sales outlet in which you purchased the AMPLICOM equipment together with the purchase receipt. All rights to claims under the terms of warranty in accordance with this agreement must be asserted exclusively with regard to your sales outlet. Two years after the purchase of our products, claims under the terms of warranty can no longer be asserted.
Technical details Technical details Alarm Clock Frequency Power supply Telephone plug Batteries Initial charging time Optimum ambient temperature Optimum storage temperature Transmission power Dimensions L / W / H Weight 422 MHz Input: 210-240 VAC, 50/60Hz Output: 12VDC, 670mA BS 6312 2 x AAA 1.2 V, 500 mAh, NiMH Up to 16 hrs 32˚F to 104˚F (0˚C to 40˚C) -4˚F to 140˚F (-20˚C to 60˚C) 10 dBm 5.2 x 5.8 x 3.3 in (132 x 146 x 84.6 mm) 12.3 - 13.
THIS PAGE LEFT INTENTIONALLY BLANK
CL100 Guía del usuario
Índice Funciones del reloj despertador analógico........................................... 3 Funciones de la base vibratoria inalámbrica ........................................ 4 Instrucciones importantes de seguridad........................................... 5 Equipo incluido................................ 6 Instalación........................................ 6 Notificación por LED....................... 8 Funciones del reloj.......................... 9 Ayuda y asistencia técnica...........
Funciones del reloj Funciones del reloj despertador analógico CL100 11 1 Botón de 22 3 3 repetición de alarma/Luz de alarma/ luz de llamada entrante/ Detener alarma 66 11 Entrada para 12 Entrada para transformador 13 Entrada para 9 8 Activación/ 14 Ajustar hora de 10 11 11 3 línea telefónica 7 Vibración y 10 13 13 reloj 77 88 9 16 16 desactivar alarma 5 Configure una 6 Altura 15 15 14 14 3 Activar/ 10 Iluminación del de 5 señales acústicas 5 5 apagado/Pilas conectad
Funciones del reloj Funciones de la base vibratoria inalámbrica CL100 1 LED: Alarma 1 22 33 activada/ desactivada/ Carga de las pilas baja 2 Activación/ desactivación de la base vibratoria 3 Compartimiento para pilas 4 Tornillos del 44 55 4 compartimiento para pilas 5 Entrada del cable de conexión Centro de Atención al Cliente
Seguridad Instrucciones importantes de seguridad Lea detenidamente este manual de uso. GUARDE ESTAS INSTRUCCIONES. Uso previsto Este reloj despertador está diseñado para emitir una alarma acústica o señal de alerta a una hora prefijada o al recibir una llamada telefónica. Cualquier otro uso se considera no conforme al objetivo previsto. No se permite ninguna modificación ni reconstrucción no autorizada. No abra el dispositivo ni intente repararlo solo.
Introducción Introducción: Equipo incluido • • • • • 1 reloj despertador analógico 1 transformador 1 base vibratoria 1 cable conector para la base vibratoria 2 pilas recargables AAA, 500mA Ni-MH para el reloj despertador • 3 pilas recargables AAA, 800mA Ni-MH para la base vibratoria • Cable telefónico • Instrucciones de uso • Tapa del compartimiento para pilas Instalación 1. Conexión del reloj despertador i. Introduzca las pilas provistas en el compartimiento para pilas del reloj.
Introducción ii. Vuelva a colocar la tapa del compartimiento para pilas en la parte inferior del reloj despertador. iii. Atornille la tapa del compartimiento para pilas al alojamiento del reloj despertador. 2.
Introducción Getting started Notificación por LED Esfera del reloj despertador Las siguientes funciones se muestran en la esfera del reloj despertador: Rojo: La función de alarma está activada. Naranja parpadeante: La función de alarma está activada y la carga de las pilas está baja. Base vibratoria Las siguientes funciones se muestran en la base vibratoria: Verde parpadeante cada 2 segundos: La base vibratoria está activada. Rojo: La base vibratoria se está cargando.
Funciones del reloj Funciones del reloj Ajuste de la hora Gire la perilla de ajuste de hora hasta que el reloj muestre la hora correcta. Ajuste de la alarma Gire la perilla de ajuste de alarma hasta que el reloj muestre la hora correcta para que suene la alarma. Activar y desactivar la alarma Gire la perilla para activar/desactivar la alarma en sentido horario para activarla. Gírela en sentido antihorario para desactivarla.
Funciones del reloj Precaución: La exposición a la alarma a todo volumen durante un período prolongado puede provocar lesiones auditivas. Selección de la señal acústica Gire la perilla de señal acústica para elegir la señal acústica que desee. Ajuste de la altura Gire la perilla de altura para ajustar la altura. Es posible discernir tonos a altura mayor o menor incluso en un volumen bajo.
Funciones del reloj Ajuste de la luz parpadeante ON OFF Deslice el interruptor para hacer que la luz del botón de repetición de alarma parpadee mientras suene la alarma. Hay dos ajustes disponibles: (de izquierda a derecha) activado (On) y desactivado (Off). Ajuste de la demora de la repetición de alarma 0m 5m 15m REPETICIÓN DE ALARMA Deslice el interruptor de demora de repetición de alarma para ajustar la demora. Hay tres ajustes disponibles: (de izquierda a derecha) 0 min, 5 min o 15 min.
Ayuda y asistencia técnica Ayuda y asistencia técnica Si tiene problemas con el reloj, consulte la siguiente información antes de llamar al servicio de asistencia técnica. Si continúa teniendo problemas, llame al Centro de Atención al Cliente al 1-866-AMPLICOM (267-5426) para recibir asistencia. Guía para la solución de problemas El reloj no funciona 1. Las pilas tienen muy poca carga o no se introdujeron pilas. 2. El reloj no está enchufado. La base vibratoria no funciona 1.
Mantenimiento y garantía Mantenimiento y garantía Mantenimiento • Limpie las superficies del equipo con un paño suave sin pelusa. • Nunca use agentes limpiadores ni disolventes. Garantía El equipo AMPLICOM ha sido producido y probado de acuerdo con los métodos de producción más recientes. La implementación de materiales cuidadosamente seleccionados y de tecnologías altamente desarrolladas garantiza el funcionamiento sin inconvenientes y una gran durabilidad.
Mantenimiento y garantía de daños queda excluido si no hay pruebas de intención o negligencia grave por parte del fabricante. Si su equipo AMPLICOM muestra indicios de defectos durante el período de la garantía, devuélvalo al punto de venta donde lo haya comprado junto con el recibo de compra. Todos los derechos de reclamo bajo los términos de la garantía en conformidad con este acuerdo deben reivindicarse exclusivamente en el punto de venta donde haya adquirido el producto.
Technical details Especificaciones Reloj despertador Frecuencia Fuente de alimentación Enchufe telefónico Pilas Tiempo de carga inicial Temperatura ambiente óptima Temperatura de almacenamiento óptima Potencia de transmisión Dimensiones L. / Anch. / Alt. Peso 422 MHz Entrada: 210-240 VCA, 50/60 Hz Salida: 12 VCC, 670 mA BS 6312 2 x AAA 1.
Questions? ¿Dudas? Amplicom USA Service Center 310 Ambrose Avenue Nashville, TN 37207 V/TTY: 1-866-AMPLICOM (267-5426) www.amplicomusa.