Operation Manual

Helpline 0844 800 6503 (See page 66 for costs and hours of operation)

USING YOUR ANSWERING MACHINE

Set the answer mode

There are three answer modes to choose from: Answer & Record, Answer only

or Answer off. If you set the answer mode to Answer only your callers will not

be able to leave a mesage.

1. Switch your answering machine on by pressing

on the base.

2. To change the mode between Answer & Record, Answer Only or

Answer Off press and hold

for a couple of seconds.

Record your outgoing message

You can change the default answering message to your own. Your outgoing

message needs to be under two minutes.

1. Press and hold

on the base for a couple of seconds and then record your

message after the beep. The base message counter will show

during recording.

2. To stop recording, press

. Your outgoing message will be played back

to you, the base message counter will show

Note: to return your outgoing message to the default message, simply press

and hold

while the outgoing message is playing.

9483 PowerTel 580 UG [6].indd 53 12.05.10 12:12