Operation Manual
Helpline 0844 800 6503 (See page 66 for costs and hours of operation)
58
USING YOUR ANSWERING MACHINE
Change PIN
1. Press and hold the button (located underneath the base) for a couple of
seconds. The current 3 digit PIN will be announced and you will be prompted
to enter your rst new digit. You can select digits between 0 and 9.
2. Select the new rst digit using the
or buttons, the digits will also be shown
on the base message counter. Press
to conrm.
3. Repeat the above procedure for your new 2nd and 3rd digits.
4. After you’ve conrmed your 3rd digit your new security PIN will be
announced.
Press the key at any time to exit changing the PIN code mode and return
to standby. The PIN code will remain unchanged.
Call in to check messages
1. Dial your own phone number from the remote phone and wait until the
answering machine picks up the call.
2. Press
twice, then enter your 3 digit PIN after the voice prompt.
3. You can manage your messages using your keypad (see remote
instructions below)
Note: if you make a mistake entering your PIN three times, your answering
machine will hang up and you’ll need to call and try again.
9483 PowerTel 580 UG [6].indd 58 12.05.10 12:12