User guide

Service Center

GETTING STARTED

Note: When fully charged, the wrist shaker’s battery will last  ve days. The

larger red light will  ash slowly when the battery is low and needs to charge

for 10 hours.

4. Register the wrist shaker to the PowerTel telephone

Important: If the wrist shaker was purchased separately from a PowerTel

phone, it will need to be registered prior to use.

i. Turn on the wrist shaker by pressing and holding the button for

 ve seconds.

ii. Press and hold the

button again for 12 seconds, until the registration light

 ashes green quickly. The wrist shaker will be in registration mode for about

1 minute.

iii. Activate registration mode on the PowerTel phone.

For a PowerTel 500 or PowerTel 580 phone:

Press and hold the registration key

for about ten seconds until the charging

light  ashes.

For a PowerTel 580 Combo:

Press and hold

until Register on the display.