Operation Manual

Remote access code settings
The remote access code is a 3-digit code used to operate the
machine remotely (refer to “Remote Operation”). The remote
access code is set to '0 0 0' by default.
Checking the Remote access code
Press on the bottom of the base brief-
ly. The current setting will be announced.
Changing the Remote access code
> 2 sec Press on the bottom of the base for
approx. 2 seconds. The current setting will be
announced.
Change the setting digit by digit with the keys
/ and press briefly for
storing and skipping to the next digit. The new
setting will be announced.
If you do not press any keys for 10 seconds,
the machine will revert back to the answering
machine menu, without changing the settings.
Clock setting
After the system clock set by user (see page 14), all recorded
messages will then be stamped with date and time. When play-
ing the message, the answering machine will announce day of
week and time in front of the recorded message.
You can also enter time and day with the following procedure. If
there is a loss of power in the base, the settings will be lost.
Setting time and day
> 2 sec Press and hold down for approx. 2
seconds. The current day will be announced.
/ Use the buttons depicted to set the current
day (will be voice prompted).
Press briefly.
/ Use the buttons depicted to set the current
hour (will be voice prompted).
Press briefly.
/ Use the buttons depicted to set the current
minute (will be voice prompted).
Press briefly.
The answering machine plays the current day
of week and time.
Helpline UK 0844 800 6503
(See page 26 for costs and hours of operation)
23
ANSWERING MACHINE