User manual

Remote operation
The answering machine can be operated remotely using a
tone-dialling (DTMF) telephone.
1. Dial your own telephone number.
2. If the answering machine is set to on it will answer after the
preset delay. If the answering machine is set to off, it will
answer after 20 rings with OGM 2.
3. Wait for the end of the announcement and then press the
star key 2 times. You will hear a beep.
4. Slowly enter the remote access code (default “0 0 0”).
5. You will hear two short beeps for confirmation.
6. Follow the spoken information for using the remote access.
2 Playback messages
2 Interrupt playback / restart playback
3 Skip forward to next message
1 Skip back to previous message
1 Repeat the current message
6 Stop playback
7 Delete current message
0 Delete all old messages
4 Playback current OGM
9 Turn on answering machine / Toggle between “Answer
and Record” mode and “Answer Only” mode
5 Record new OGM
6 Stop recording
8 Turn off answering machine
6 Stop remote operation.
Registering/de-registering handsets
Five handsets can be registered to a base station. The hand-
sets delivered with your telephone are already registered.
Each handset can be registered to four base stations.
To register a “foreign“ handset please refer to it’s user manual.
Registering a handset of the same type
Press the Menu key.
/ Select Handset and press
the softkey under .
/ Select Registration and press
the softkey under .
/ Select Register and press
the softkey under .
/ Select a number for the base station (1 - 4)
and press the softkey under .
Enter the relevant PIN for the base
and press the softkey under .
The new handset prompts "Press & Hold Page
Key On Base".
Press and hold down the paging key on the
base station until the LED is flashing (approx.
10 sec).
After a few seconds the handset will be regis-
tered.
Helpline UK 0844 800 6503
(See page 26 for costs and hours of operation)
24
ANSWERING MACHINE / REGISTERING/DE-REGISTERING HANDSETS