Operation Manual

Helpline 0844 800 6503 (See page 32 for costs and hours of operation)
23
USING YOUR ANSWERING MACHINE
3. Repeatedly press and release the
button until you hear the correct
hour announced and press
to conrm.
4. Repeatedly press and release the
button until you hear the correct
minute announced and press the
button. The day and time you set will
be announced.
Note: if there is a power failure, you will need to set the day and time again.
Record your outgoing message
You can change the default answering message to your own. Your outgoing
message can be up to 60 seconds long.
1. Press and keep holding the
button. After the beep begin to speak your
message.
2. Release the
button when you’ve nished.
3. Check your outgoing message is how you want it but pressing
to hear it.
Note: if you want to change your own recorded outgoing message, simply
record another one following the instructions above and your existing
message will be over written.
To restore the pre-recorded outgoing message
1. Press and hold the button.
2. After the beep, release the button. The pre-recorded message is restored.