Digitalwecker mit schnurlosem Vibrationskissen Digital alarm clock with cordless vibration pad Réveil numérique avec horloge parlante, coussin vibrant inclus Digitale wekker met spraakmelding voor tijd, inclusief trilkussen Bedienungsanleitung Operating Instructions Mode d’emploi Gebruiksaanwijzing TCL200
Safety Information 1 Safety Information Please read this operating instruction manual thoroughly. Disposal In order to dispose of your device, take it to a collection Intended use point provided by your local public waste authorities (e.g. This alarm clock is designed to provide an acoustic alarm or alert recycling centre). According to laws on the disposal of signal at a set time or on receipt of a telephone call.
Operating Elements 2 Operating Elements Alarm clock (front view) 1 Snooze button, time announcement 2 LED: Alarm 1 ON" / OFF" 3 Rotary knob: Turn alarm ON" / OFF" 4 LED: Alarm 2 ON" / OFF" 5 Repeat alarm signal 6 Increase value 7 Decrease value / Select language 8 Set weekday and time 9 Set alarm time and alarm activation period 10 LED: Alarm period, Monday to Friday ON" / OFF" 11 Display 12 LED: PM (for 12−hour clock)* 1 12 2 11 3 10 4 5 20 9 6 8 7 0844 800 6503 (Using an UK landline, at
Operating Elements Alarm clock (rear view) 13 Rotary knob: Volume control 14 Rotary knob: Set one of the 5 acoustic alarm signals 15 Rotary knob: Pitch 16 Sliding switch: Vibration only", Acoustic signal only", Acoustic signal + Vibration" 17 Sliding switch: Flashing lamp ON" / OFF" 18 Sliding switch: Snooze delay, 0 min.", 5 min.", 15 min.
Operating Elements Vibration pad Status indicators on vibration pad LED (Pos. 1) Pad switched on: LED flashes green every 2 sec. Charging process: LED is red Battery charge low: LED flashes red 1 2 3 4 5 1 2 3 4 5 22 LED: ON/OFF / Battery charge low Sliding switch: Vibration pad ON /OFF Battery compartment Screws for battery compartment cover Connection cable socket 0844 800 6503 (Using an UK landline, at the time of going to print: calls cost 6p for connection charge and then 5p a minute.
Preparing the Equipment 3 Preparing the Equipment Safety information Attention: It is essential to read the Safety Information in Chapter 1 before starting up. Checking the package contents 2 The package contains: Content Connecting the alarm clock Please proceed as follows in order to be able to use the alarm clock: 1. First of all, insert the batteries supplied in the clock’s battery compartment.
Preparing the Equipment 4. Connect the equipment as illustrated in the diagram. Only use the telephone connection line supplied because the equipment may not function if another telephone connection line is used. The languages are available in the following sequence: German − French − Italian − Spanish − English Vibration pad Mains power outlet Telephone line socket In order to connect the alarm clock to a telephone connection for use as a signal amplifier, you may need an appropriate adapter.
Preparing the Equipment 6. Press the button (6) or (7) as often as necessary until the current minute is set. The alarm clock then announces the minute currently set. 7. Press the button (8) briefly to conclude the setting procedure. The alarm clock then announces the complete weekday and time setting. Setting the alarm time and period There are two alarm period settings (1 and 2) available. You can set one of three alarm periods available for each setting.
Preparing the Equipment Activating the signal In order to activate the alarm to trigger at the set time, turn the rotary knob (3) clockwise to ON". Operating the vibration pad In order to use the vibration pad, it must initially be fully charged: 1. Connect the alarm clock to the mains power supply via the power adapter plug. 2. Remove the small rubber cap from the sliding switch on the vibration pad. 3.
Settings and Functions 4 Settings and Functions Switching the alarm signal on and off Setting the pitch Activate or deactivate the alarm function by turning the rotary knob (3). Anticlockwise OFF" or clockwise ON". Turn the rotary knob (3) to set the required pitch for the acoustic signal. Setting the dimmer Setting the volume The alarm and telephone ringer volumes start quietly and increase to the maximum volume. Set the alarm volume by turning the volume rotary knob (4) to the required volume.
Settings and Functions Setting the alarm time and alarm period Setting the snooze delay 0m 5m 15m Use the sliding switch (18) to set the interval for SNOOZE Press the button (9) 5 seconds in order to set the alarm time and active alarm period. You activate the alarm period with the sliding switch (24) ( Alarm period 1" or Alarm period 2"). If the sliding switch (24) is set to Alarm period 1 + 2", the function is deactivated. the snooze delay.
In Case of Problems 5 In Case of Problems Service Hotline Should problems arise with the device, please refer to the following information first. In the event of technical problems, please contact out service hotline under tel. 0844 800 6503 (Using an UK landline, at the time of going to print: calls cost 6p for connection charge and then 5p a minute. Mobile costs may vary). In the case of claims under the terms of guarantee, contact your sales outlet. There is a 2 year period of guarantee.
Technical Data 6 Technical Data 30 Vibration pad Value Range: Approx. 100 m (in clear space) Input: 210~240 VAC, 50/60 Hz Outbox: 12 VDC, 670 mA Battery: 3 x AAA 3.6 V, 800 mAh, NiMH 2 x AAA 1.
Maintenance / Guarantee 7 Maintenance / Guarantee Maintenance No claims under the terms of guarantee can be asserted after a period of two years from the date of purchase and hand−over of Clean the housing surfaces with a soft, fluff−free cloth. the product. Never use cleaning agents or solvents. Guarantee AMPLICOMMS equipment is produced and tested according to the Declaration of Conformity This device fulfils the requirements stipulated in the EU latest production methods.
Important Notes on the Guarantee The period of guarantee for the AMPLICOMMS product begins on the date of purchase. Rights to claims under the terms of guarantee relate to deficiencies resulting from material or production faults. Rights to claims under the terms of guarantee are annulled following intervention by the purchaser or third parties.