AFi-R Quick Start Guide Package Contents AmpliFi Router Hardware Overview Router Power Adapter Ethernet Cable
AFi-R Quick Start Guide Touchscreen Display The front of the AmpliFi Router features an adjustable, full-color touchscreen display. Adjustable LED The bottom of the AmpliFi Router features an adjustable LED that is fully lit by default when the Router is configured and ready for use. The brightness settings of the touchscreen and LED are configurable using the AmpliFi app. Ethernet Ports Four Gigabit Ethernet ports available to connect 10/100/1000 Mbps wired network devices to the internet.
Installation AFi-R Quick Start Guide The AmpliFi Router can be installed using one of the following methods: App Users AmpliFi app for iPhone or Android™ Non-App Users Connect to default AmpliFi wireless network (SSID) from a computer or tablet. App Users 1. 2.
AFi-R Quick Start Guide 3. 4.
AFi-R Quick Start Guide 5. 6.
AFi-R Quick Start Guide 7. 8. Follow the on-screen instructions to configure your AmpliFi Router.
AFi-R Quick Start Guide Non-App Users 1.
2. 3. 4.
AFi-R Quick Start Guide 5. 6.
AFi-R Quick Start Guide 7. 8.
AFi-R Quick Start Guide 9. Connect to the new wireless network that you've created. App Features The system dashboard provides an overview of the AmpliFi Wi-Fi system including network status, number of connected clients, and active download/upload speeds. Tap devices to display/edit settings.
AFi-R Quick Start Guide Tap Start Test on the Performance screen to run a speed test that will provide your download speed, upload speed, and connection ping time. Swipe left on the throughput section to view additional data. A history of recent tests is displayed at the bottom. To provide guest access, determine the number of guests, select a time limit for their access, and tap Start. Guests simply connect to your wireless network named with the -guest label. No password is required.
AFi-R Quick Start Guide Resetting to Factory Defaults If the AmpliFi Router administration password is lost, factory default settings can be restored. Router Reset Use an object such as a straightened paper clip to press Reset located on the bottom of the AmpliFi Router for approximately 10 seconds until the LED turns off. Router Specifications Dimensions Weight 99.5 x 97.8 x 99.6 mm (3.91 x 3.85 x 3.92") 410 g (14.
Max. TX Power AFi-R Quick Start Guide 26 dBm Radios 2 MIMO Chains 6 Speed 1750 Mbps ESD/EMP Protection ± 24kV Air/Contact Buttons Reset Antennas (1) Dual-Band Antenna, Tri-Polarity Display 1.6" (40.6 mm) Diagonal, 240 x 240, 212 ppi, G+F Touch, Full Color Wi-Fi Standard 802.11ac Power Save Supported Wireless Security WPA2-PSK AES/TKIP Operating Temperature 14 to 131° F (-10 to 55° C) Operating Humidity 5 to 95% Noncondensing Certifications FCC / CE / IC Supported Data Rates 802.
2. Heed all warnings. AFi-R Quick Start Guide 3. Only use attachments/accessories specified by the manufacturer. WARNING: Do not use this product in location that can be submerged by water. WARNING: Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning. Limited Warranty ui.
This device complies with ISED Canada RSS standard(s). Operation is subject AFi-R licence-exempt Quick Start Guide to the following two conditions: 1. This device may not cause interference, and 2. This device must accept any interference, including interference that may cause undesired operation of the device. The AmpliFi Router has been approved by ISED Canada under IC: 6545A-AFR.
AFi-R Quick Start Guide CE Marking CE marking on this product represents the product is in compliance with all directives that are applicable to it. Country List AT BE BG CY CZ DE DK EE EL ES FI FR HR HU IE IT LV LT LU MT NL PL PT RO SE SI SK UK BFWA (Broadband Fixed Wireless Access) members noted in blue Note: This device meets Max. TX power limit per ETSI regulations.
AFi-R Quick Start Guide © 2016-2020 Ubiquiti Inc. All rights reserved.
