User`s guide

User's Guide Babyface © RME

8. Configuring the Babyface

8.1 Settings Dialog - General

Configuration of the Babyface is done via its own settings dialog. The panel 'Settings' can be

opened:

• by clicking on the fire symbol in the Task Bar's notification area

The mixer of the Babyface (TotalMix) can be opened:

• by clicking on the double arrow symbol in the Task Bar's notification area

The hardware of the Babyface offers a number of helpful, well thought-out practical functions

and options which affect how the card operates - it can be configured to suit many different

requirements.

The following is available in the Settings dialog:

• Latency

• Operation of the DSP

• Configuration of the digital I/O

• Current sample rate

• Synchronization behaviour

• State of input and output

Any changes made in the

Settings dialog are applied

immediately - confirmation (e.g.

by clicking on OK or exiting the

dialog) is not required.

However, settings should not be

changed during playback or

record if it can be avoided, as

this can cause unwanted noises.

Also, please note that even in

'Stop' mode, several programs

keep the recording and playback

devices open, which means that

any new settings might not be

applied immediately.