User`s guide

User's Guide Babyface © RME

21.5 The Control Strip

The Control Strip on the right side is a fixed element. It combines different functions that are

either required globally, or constantly used, and therefore should not be hidden in a menu.

Device selection. Select the unit to be controlled in case more than one is

installed on the computer.

DSP Meter. Shows the DSP load caused by activated EQs and Low Cuts.

The DSP of the Babyface has been designed so that an overload can not

occur. The display therefore is for information purposes only.

Undo / Redo. With the unlimited Undo and Redo changes of the mix can be

undone and redone, at any time. Undo/Redo does not cover graphical

changes (window size, position, channels wide/narrow etc.), and also no

changes to the Presets. The accidental overwrite of an EQ Preset can not be

made undone.

Undo/Redo also operates across Workspaces. Therefore a completely

differently set up mixer view can be loaded via Workspace, and with a single

click on Undo the previous internal mixer state is returned – but the new

mixer view stays.

Global Mute Solo Fader.

Mute. Global Mute operates in a pre fader style, muting all currently activated routings of the

channel. As soon as any Mute button is pressed, the Mute Master button lights up in the Control

Strip area. With this button all selected mutes can be switched off and on again. One can com-

fortably set up a mute group or activate and deactivate several mute buttons simultaneously.

Solo. As soon as any Solo button is pressed, the Solo Master button lights up in the Control

Strip area. With this button all selected Solos are switched off and on again. Solo operates as

Solo-in-Place, post fader style, as known from common mixing desks. A typical limitation for

mixing desks, Solo working only globally and only for the Main Out, does not exist in TotalMix.

Solo is always activated for the current submix only.

Fader. A Shift-click on a fader adds the fader to the temporary fader group. All faders now

marked yellow are ganged, and move simultaneously in a relative way. The temporary fader

group is deleted by a click on the F symbol.