User manual

AmpliTube

™

Live

3 - Using AmpliTube™ Live

Stomp Section

The Stomp section (fig. 3.4) is equipped with 3 pedal processors:

1) Vintage wah pedal, with manual or auto wah options and, thanks to the

modeling technology, a real-wah sound!

2) Analog delay, delivers that typical warm tone of the early stomp delay

units, without the hiss!

3) Analog solid-state overdrive stomp box, this is the perfect unit for “driv-

ing” the first stage of all the AmpliTube™ preamps. A warm, rich and versa-

tile overdrive pedal, that can saturate itself and overdrive the amp as well.

All the connections between the internal stages of AmpliTube™ Live (and

also of course between these “pedals”) are 32 bit floating point for an

unmatched audio resolution that’s essential for a realistic emulation of

what happens in the analog domain.

Amp Section

After passing through the stomp box section the signal goes into the heart

of AmpliTube™ Live: the Amplifier emulation (fig. 3.5).

Here everything is physically modeled and the signal first feeds into the

gain stage with 3 Amp Models to choose from:

Clean Modeled after the Vox® AC-30 top boost

Crunch Modeled after the Marshall® JCM-800

Lead Modeled after Fender® Solid State combos

3.5

3.6

fig. 3.4

fig. 3.5