User manual

AmpliTube
™
Live
4 - Controlling AmpliTube™ Live
21
Factory presets from 33 to 64 are re-writable and are designed to be used
with a guitar cabinet connected to the computer in combination with a
power amplifier.
At startup AmpliTube™ Live will load the latest used preset, the name of the
preset is always shown in the big LED display that’s under the amp head.
The purple numbers indicates the memory location number, and the preset
name is shown in red.
You can switch presets up and down with the arrows you find on the right
of the preset (fig 4.16). You will see both the number and the name of the
preset change.
Once a preset has been modified a small dot appears in the preset display,
remembering that this setting has not been saved yet.
Once you got the setting you like and you would like to save it press the
SAVE button (fig 4.17).
The preset number starts to flash and you can now select the destination
preset location you’re going to save to, remember that locations from 1 to 32
are read only. Once you selected the destination location just type the name
of the preset you wish to save and press SAVE again. The preset’s number
display stops flashing and the user preset is stored.
Presets can be quickly recalled with just one click by selecting them directly
from the top menus marked: 1..32, 33..64, 65..96 and 97..128.
MIDI control
Presets
Presets can be switched via an external midi controller.
The only thing the controller needs to be able to do is to send Program
Changes on channel 1.
Program change #001 is used to move UP in the presets list, program
change #002 is used to move down.
If for any reason you don’t feel comfortable with these two program
changes, or you don’t know how to setup your foot controller in order to
4.10
fig. 4.16
fig. 4.17