User manual

have it sending these, you can configure AmpliTube™ Live to receive differ-

ent program changes. To do this simply pull down the “settings” menu and

select “Learn Program up CC/PC” (fig 4.18).

AmpliTube™ Live will now wait for you to send a Program change to it,

any value, and once received this will be assigned as the “Program UP”

program change.

The same is for the “Learn Program dn CC/PC” command, which is to be

used to “learn” the program change we will use to move down in the presets

list.

These settings will remain unless the “Learn Program” functions are used

again.

Volume and Wah Control

Midi control is also available for volume and wah control.

These two features use MIDI continuous controllers.

Most guitar MIDI pedalboard or keyboard expression pedal connected via

midi to the computer can control these functions.

Setup is very simple. Pull down the “settings” menu and select “Learn

Volume CC”.

AmpliTube™ Live will now wait for you to send a controller change to it.

Once received, this will be assigned as the “Volume” controller value.

The “Learn Wah CC” command functions the same way, assigning a control-

ler value to the wah function.

Both Settings remain intact until the “Learn” functions are used again. The

Volume and Wah knobs on the AmpliTube™ Live interface should now move

with the associated controller changes.

fig. 4.18

4 - Controlling AmpliTube™ Live

AmpliTube

™

Live