User guide

9
SW915 DIGITAL AUDIO TRAVEL PARTNER
compact diSc player operation
To operate the CD player with the
remote control, the button on the
remote labeled CD (15) must be
pressed first, in the same man-
ner as when adjusting the vol-
ume for the CD player. Once the
CD button is pressed, buttons
22-32 and 42-44, will continue to
control their respective functions
on the CD Player until one of the
other input buttons is pressed.
HANDLING THE DISCS:
Always insert a CD, CD-R, CD-R/W
into player with label side up!
Proper handling and care of CDs
should be taken to insure proper
operation. Fingerprints and dust
should be carefully wiped off the
surface, starting from the center of
the disc and moving out towards
the edge. It is best to avoid
touching the surface opposite
the label to prevent scratching or
leaving fingerprints on the surface
area. Always remove disc from
•
SD/USB/CD Button on far left of button row selects between SD,
USB and CD playback.
•FOLDER button selects which folder in USB or SD storage devices to
play back.
•FB skips back to the previous folder or selection.
•F.F skips forward to the next folder or selection.
•REV backs up on the current folder or selection.
•F.WD moves forward on the current folder or selection.
•PLAY/PAUSE starts playback of the current folder or selection, and
also stops the selection when pressed during playback. When the
button is pressed again, playback resumes at the point where the
selection was stopped.
•STOP/EJ stops the selection from playing. Pressing and holding the
button for a couple seconds after the CD has stopped playing will
eject the CD disk from the player.
CH 1 CH 2 CH 3
BASS TREB V/M
AUX CD MP3 TAPE
LEVEL DELAY THRSH CH1/W1
LEVEL DELAY
M VOL
MUTE ALL
DUCKING
REVERB
WRLS1
FASTER
NORMAL
SLOWER
FOLDER
SOURCE
RANDOM REPEAT
RECORD
WRLS2 WRLS3 WRLS4
1-800-267-5486 WWW.AMPLI.COM
•PITCH CONTROL is adjusted by three
push buttons next to the volume knob:
•PressandholdHI to speed up playback material over a range.
•NOR adjusts the speed back to normal speed.
•PressandholdLO to slow down playback material over a range.
•VOLUME knob increases the output level when turned clockwise,
and decrease the volume when turned counter clockwise. This is in
addition to the volume control function CD Volume in the preamp,
and is a convenience for balancing the output with other sources.
For optimum playback leave the master volume at 1 o'clock and adjust
the preamp volume for proper listening levels.
player before transporting unit.
NOTE: CD will play automatically when Digital Partner is powered on if
CD is left inside the CD player.
POWER:
Press POWER button to turn CD Player on.
LOADING AND UNLOADING DISCS:
To insert disc, gently insert into disc player slot until engagement
mechanism pulls CD into player. Do not force CD into unit.
To remove disc press STOP/EJECT button twice and gently remove CD,
place CD back into jewel case.
NORMAL DISC PLAY:
Insert CD into player and press PLAY/PAUSE button if CD hasn’t
already begun to play. Disc play will start at first track. Player display
will indicate track number and time.
To operate the CD player with the remote control, the button on the
remote labeled CD must be pressed first.
The CD player has been upgraded to add USB & SD Card playback
and now functions with the 915 remote control.
Please note the following new features:
•
USB 2.0 ‘A’ input
for memory devices
containing compatible
audio files (MP3).
•SD Card Slot for SD
cards containing
compatible audio files
(MP3).