User's Manual

180
150
120
90
60
30
0
330
300
270
240
210
100
1K
10K 20K
200
500
2K
5K
+3
+3
+6
+8
-3
-3
-5
-6
-10
-4
BLACK: 0
RED: 180
Frequency Response:(0dB=1V/Pa,1KHz)
-20
-30
50
2. Polar Pattern
1KHZ
Common issues:
Specifications :
1.Frequency Response
+20
+10
0
-10
MightyMic F
Directional Condenser Shotgun Video
Microphone for Smartphone/Camera
Introduction :
Thank you for purchasing the MightyMic F microphone. In order to get
the maximum benefit of the microphone you need to use an App
designed to support all the audio features such as FilmicPro or MoviePro
for video recording with your phone. Use the included cable for
recording with your camera. It can be used with the MightyMic Pro
adapter for wireless recording direct to your phone. Please visit our
website for the latest info on supported Apps and features.
Description of components:
1: Microphone Element
2: Smartphone Audio Connector
3: Earphone Monitor Connector
4: Phone Stabilizer
Package list:
2
1
3
Mic Body
Deadcat Windscreen
Foam Windscreen
• To avoid any interference, please turn off the Wi-Fi on your
phone and set the device to airplane mode
• Why there is low-level noise when I am recording with my camera?
It is commonly caused by the ”Automatic gain control” or “AGC” function of the
camera. Generally when a camera detects low or no audio input signal the camera
will automatically increase the input gain. When the input gain is increased the
noise level of the camera’s microphone also increases. The AGC function of certain
cameras can be disabled, please contact the manufacturer of your camera for
more information. We recommend that you manually set the audio level to
optimize the Signal to Noise ratio and disable your camera’s AGC. You can also
remove the noise using many software programs after your done recording.
• The microphone has a headphone jack on the rear for playback. It can also
be used for monitoring during recording with a compatible App such as
MoviePro or MightyMic Pro Recorder. Using this App will allow you to
listen and set sensitivity levels before recording and listen while recording
Please remove the mic for playback or use the headphone jack
Operation:
1. Install the mic into a smartphone, a DSLR camera, or on a boom pole
As shown above insert the Mic into your phone’s headphone connector and
rotate it to the appropriate position.
Secure the mic with the smartphone stabilizer support.
You may need to use a phone mount and Lightning adapter if your device does
not have a headphone jack.
Choose whatever windscreen is best for your application.
!
!
!
!
!
1
3. Specifications
Frequency response range
21mm*88mm
Product dimension
Harmonic distor tion THD
Dynamic range
Sensitivity
SNR
Product weight
Cardioid
110 dB(single microphone)
50HZ-20KHZ
<1%
100dB
-34dB+2dB
>70dB
28.5g approximately
Mic Stabilizer
4
Maximum SPL
Polar Pattern
Camera cable
Hot shoe Shock Mount
Warranty/Support:
Product warranty is limited to defects in material and workmanship for one
year to the original purchaser. Warranty does not cover collateral damage
due to misuse, abuse, incorrect use and other inappropriate uses of this
product. The limitation of this warranty is to repair or replace the defective
parts. Consequential and incidental damages are not covered under this
warranty. This warranty gives you specific legal rights, you may also have
other rights which vary from state to state. See details at ampridge.com for
updated information.
If your device is not performing as it should please visit our website at
ampridge.com or e-mail us at [e-mail]