Specifications

Software Configuration
3–41
Note
Other I/O ports below 100h are reserved for internal system
functions and should not be accessed.
3.20 UTILITY SOFTWARE OVERVIEW
The Little Board/486i Development Kit provides a number of software utilities on the Ampro Common
Utilities diskette. Some of the programs provided on this diskette are:
FLASHWRI—Flash PROM utility for writing program images to Flash devices in byte-wide sockets.
SETUP—A utility used to access the ROM BIOS SETUP function from the DOS command line.
SCSICOMP—A SCSI utility that compares data from two SCSI direct access devices.
SCSICOPY—A SCSI copy utility that copies data between two SCSI direct access devices
SCSIFMT—A hard disk utility for low-level SCSI drive formatting.
SCSITOOL—A SCSI debugger that issues low level commands to any SCSI bus device.
SERLOAD—A serial loader utility for downloading files from a remote host prior to system boot.
SERPROG—A utility to program Flash byte-wide devices from a serial port.
TVTERM—A Televideo 900-series terminal emulator.
WATCHDOG—Used to stop, start, or retrigger the watchdog timer function.
These utilities and others are described in the Ampro Common Utilities manual.