Specifications

Little Board/486i Technical Manual
Index–2
Clock, 2-41, 3-3
COM port table, 3-20
Configuration
Summary, 2-4
Configuration, Byte-wide, 2-25
Connector
AUI Ethernet (J8), 2-40
CRT (J5), 2-31
Ethernet RJ45 (J7), 2-39
Flat panel video (J3), 2-32
Floppy (J14), 2-18
IDE (J12), 2-19
Keyboard (J16), 2-43
LCD bias supply (J4), 2-34
Parallel port (J15), 2-15
PC expansion bus (P1, P2), 2-47
Power (J1), 2-6
SCSI (J9), 2-21
Serial ports (J11, J13), 2-12
Utility (J16), 2-42
Connector locations, 2-3
Connector usage summary, 2-2
Contrast, flat panel, 2-35
Cooling, 2-8
Coprocessor, math, 2-10
CPU, 1-1
CPU, cooling, 2-8
CRT connector (J5), 2-31
CRT video modes, 1-11
CTRL-ALT-ESC, 3-1
Cursor commands, 3-20
D
DC Power, 2-6
DIN plug, keyboard, 2-43
Direction, parallel port, 3-21
Disk, floppy, 2-16, 3-3
Disk, IDE, 2-18, 3-4
Disk, SCSI, 2-20, 3-29
DMA, 2-51
DOS, 3-16
and SCSI, 3-29
LAN drivers for, 3-32
MODE command, 3-21
SCSI drive preparation, 3-29
Versions, 3-29
DRAM, 2-8, 3-4
Drivers, LAN, 3-32
E
Embedded-PC System Enhancements, 1-4
EMS, 3-17
Environmental specifications, 1-7
Ethernet ID, 3-33
Ethernet interface, 1-3, 1-6, 2-38, 3-30
Expanded memory, 2-9
Expansion bus, 1-2, 2-44
Expansion bus, ribbon cables, 2-45
Extended memory, 2-9
External battery, 2-43
External Video Overlay, 3-36
F
Filtering, PC bus, 2-45
Flash EPROMs, 2-28
Flat panel contrast, 2-35
Flat panel displays, 1-9
Flat panel video, 2-29
Flat panel video connector (J3), 2-32
Floppy connector (J14), 2-18