Specifications

Little Board/486i Technical Manual
iv
PREFACE
This manual is for integrators and programmers of systems based on the Ampro Little Board
™
/486i single
board system. It contains information about hardware specifications, jumpering and installation, details
about system setup, and how to configure peripheral drivers.
There are three chapters and an Appendix, organized as follows:
! Chapter 1—Introduction. General information pertaining to the Little Board/486i, its features, and
specifications.
! Chapter 2—Hardware Configuration. A description of how to configure and connect the Little
Board/486i for use with a variety of onboard and external devices. Included are tables listing the
pinouts of each of the board's connectors, details about jumper options, installation and mounting
instructions, and descriptions and specifications regarding peripheral interfaces provided on the
board.
! Chapter 3—Software Configuration. An overview of the system features, configuration options,
SETUP guidelines, utilities, and peripheral drivers that are available under DOS, Windows, and other
operating systems.
! Appendix A—Cable diagrams for flat panel displays that are supported in the board's ROM BIOS.