Specifications

Hardware Configuration
2–32
J5 Pin Signal Name DB-15 DB-9
1Red 11
2 Ground 6 6
3 Green 2 2
4 Ground 7 7
5Blue 33
6 Ground 8 8
7 Horizontal Sync. 13 4
8 Ground 10 9
9 Vertical Sync. 14 5
10 Ground 4, 5, 9,
11, 12, 15
-
Table 2-22 CRT Interface Connector (J5)
Connector Type Mating Connector
RIBBON 3M 3473-7600
DISCRETE WIRE MOLEX HOUSING 22-55-2102
PIN 16-02-0103
Table 2-23 J5 Mating Connectors
2.12.2 Connecting a Flat Panel (J3)
Signals for a wide range of flat display panels, both color and gray scale, appear on connector J3.
Although flat panels of a similar type use similar sets of signals from the video controller, they do not
share a standardized interface connector pin configuration. Note, also, that the names of panel
control signals vary from manufacturer to manufacturer. Read the description of each signal carefully
to determine how each signal is to be used for the display you choose. Refer to the panel
manufacturer’s technical literature to determine how to wire a cable for the panel you choose for your
application.
Cable tables for the standard flat panels that are supported in the ROM BIOS are given in
Appendix A.