Specifications

Index-1
INDEX
28-pin Device Installation, 2-6
2mm Shorting Blocks, 2-3
Access Time, 2-5
Address, Byte-wide Sockets, 3-8
Ap Note, AAN-8702, 3-8
Ap Note, AAN-8804, A-19
Ap Note, AAN-8805, 4-15, A-23
Backplane Quality, 2-22
Backup Battery, 2-11
Battery-backed Clock, 2-10, 4-15
BATV, 2-11
Bidirectional, 2-13, 4-10
Bus Termination, 2-22
Byte-wide Jumper Numbering, 2-6
Byte-wide Memory, 2-5
Byte-wide S0 Jumpering, 2-8
Byte-wide S0 SRAM Jumpering, 2-9
Byte-wide Socket Enable, 4-13
Byte-wide Sockets, 3-8, 4-12
Byte-wide, Large Devices, 4-13
Clock Rate, CPU, 4-6
Clock, OSC, 4-9
Clock, PC Bus, 4-9
Configuration Jumpers, 2-3
Configuration Memory, 2-3, 3-2
Connector Usage Summary, 2-1
Controllers, 1-3
Ctrl-Alt-Esc, 3-3
Custom Jumpering, 2-9
DIN Connector, 2-11, 2-13
Direction Bit, Parallel Port, 2-13
DMA Channel Assignments, 4-8
DMA Controller, 4-7
DOS Versions, 3-1, 3-2
DRAM, 4-6
EEPROM, 2-3, 3-2, 4-15
EEPROM, OEM Bits, 4-15
Expansion Bus, 4-9
Features, 1-2
Flash EPROMs, 2-4
Flash Programming, 4-14
Hardware Configuration, 2-1
Hot Key, 2-4, 2-7
I/O Address Map, 4-5
IDC Cables, 2-1
Interrupt Assignments, 4-7
Interrupt Controller, 4-6
Interrupt, Parallel Port, 2-14
Keyboard, 2-11, 3-6
Lithium Battery, 2-11
Locations, Connector, 2-2
Locations, Jumper, 2-2
LPT1, 2-13, 3-7
LPT2, 2-13, 3-7
Mating Connector, J2, 2-16
Mating Connectors, J3, 2-15
Mating Connectors, J4, 2-13
Mechanical Dimensions, 1-4
Memory Map, 4-4
Memory, Byte-wide, 2-5
Memory, System DRAM, 2-5
MiniBackplane, 2-21
MiniModule Expansion, 2-21
MiniModule/FSS, 1-1
Module Stacking, 1-5
MS-DOS, 3-1
NMI, 3-9
Operating Environment, 1-4
Options, Jumper, 2-2
Parallel Port, 3-7, 4-10
Parallel Port (J3), 2-13, 2-15
Parallel Port Register Bits, 4-12
Parallel Port Signals, 4-11