User`s manual

16 Hardware Reference
Hardware Features
Function Electronic specification
Isolated Digital Input Photo Coupled Input x 2 ch
Status Normal is High, active is Low
Input voltage range
(ComI to In)
0 to 25 V
High Level (active off) ComI to In < 0.5 V
Low Level (active on) ComI to In > 2.2 V
Isolated Digital Output Photo Coupled Output x 2 ch
Status Normal is Open, active is Low
Load voltage range 3 to 24V
Output sink current 80 mA (Max)
Output voltage drop 1.0 V (Max)
Leak current 0.1 mA (Max)
Reverse voltage -6 V
Isolated Trigger Input Photo Coupled Trigger input x2 ch
Status Normal is High, active is Low
Input voltage range
(TrgComI to TrgIn)
0 to 25 V
High Level (active off) TrgComI to TrgIn < 0.5 V
Low Level (active on) TrgComI to TrgIn > 2.4 V
Minimum pulse width 0.1 ms
Trigger In Control
Polarity (Trigger edge) Rising / Falling edge selectable
Isolated Trigger out Photo Coupled Trigger output x2 ch
Status Normal is High, active is Low
Load voltage range 0 to 5 V
Output current 16 mA (Max)
Output voltage drop 0.4 V Max(@16 mA)
Trigger Out Control
Trigger delay 0 ms to 1000 ms selectable (1 ms/step.)
Trigger out pulse width
0 ms to 50 ms selectable (0.1 ms/step)
Set at 0 ms to disable
Polarity Positive / Negative Selectable
Table 2-9: Hardware Features