User`s manual

Function Library 39
4.2.10 GiE62_SetTriggerOutWidth
Description
Set the width of output triggers.
Syntax
int GiE62_SetTriggerOutWidth(int CardID, int port,
int width);
Parameters
CardID
[in] Card ID of GIE62+. The card ID could be 0, 1, 2 and 3. It
is defined by the DIP switch on the board.
port
[in] Port number of GIE62+. The port number could be 1
and 2.
width
[in] A 32-bit integer variable which specifies the width of out-
put triggers. The unit of width is in 0.1 milliseconds (ms).
The value should be 0 - 500.