User`s manual

40 Function Library
4.2.11 GiE62_SetTriggerOutPolarity
Description
Set the output polarity of output triggers.
Syntax
int GiE62_SetTriggerOutPolarity(int CardID, int
port, int OutPolarity);
Parameters
CardID
[in] Card ID of GIE62+. The card ID could be 0, 1, 2 and 3. It
is defined by the DIP switch on the board.
port
[in] Port number of GIE62+. The port number could be 1
and 2.
OutPolarity
[in] A 32-bit integer variable which specifies the output
polarity of output triggers.
The value should be 0 or 1.
 0: Negative
 1: Positive