Specifications

Little Board/P5i Technical Manual
1–10
1.5.5 Mechanical and Environmental Specifications
 8.0 x 5.75 x 1.2* inches (146 x 203 x 30 mm). Refer to Figure 1–1 for mounting dimensions.
* Note: this specification depends on the height of the DRAM SIMM module. Some versions of DRAM
SIMM modules can exceed this specification.
 Power requirements (typical, with 8M byte DRAM)
– 100 MHz: 2.6A @ 5V DC
– 133 MHz 2.3A @ 5V DC
– 166 MHz 2.9A @ 5V DC
 Operating environment:
− Standard: 0° to 60° C (with adequate airflow); 0° to 70° C (with VRT processor); Extended
temperature range can be tested by special order
− 5 to 95% relative humidity (non-condensing)
 Storage temperature: -55° to +85° C
 Weight: 11.6 oz. (329 gm), no DRAM installed
 Shock and Vibration
– Tested to MIL-STD 202F, Method 213B, Table 213-I, Condition A (three 50G shocks in each axis)
and MIL-STD 202F, Method 214A, Table 214-I, Condition D (11.95B random vibration, 100 Hz to
1000 Hz for 5 minutes per axis).
 ISA portion of the PC/104-Plus expansion bus
− Female, non-stackthrough, 16-bit bus connectors, for expansion via PC/104 modules
− Four mounting holes
 PCI portion of the PC/104-Plus expansion bus:
− 4 x 30 (120-pin) 2 mm. pitch non-stackthrough connector.
− Electrical specifications equivalent to the PCI Local Bus Specification Rev. 2.1.
Note
Contact Ampro regarding custom configurations and special order
options.