Item Brochure

©2017 Amprobe
®
For detailed specications and ordering go to amprobe.com 0000000 AAmprobe
®
| [e-mail] | Fluke Corporation, Everett, WA 98203 | Tel: 877-AMPROBE (267-7623)
amprobe.com
DGC-1000A Features
• Accurate ground resistance
measurement from 0.025 to 1,500
Ohms
• True-rms current measurement
including leakage current
• Accurate readings regardless
of power quality in less than 10
seconds
• Continuity beep if the resistance is
lower than 40.00 Ohms
• Simple and easy to use, no test
leads or auxiliary electrodes
necessary
• Data logging capability - 116
records
• Individual data point recording
• User selectable high & low ohm
audible alarms
• Auto power off (can be disabled)
• Low battery indicator
• Large LCD display
• Safety: Category III 300 V and
Category II 600 V
DGC-1000A
Clamp Ground Resistance Tester
DGC-1000A
Clamp Ground Resistance Tester
The Amprobe DCG-1000A clamp ground resistance tester, designed for
use by electricians and electrical contractors, measures ground resistance,
current, and continuity in multi-grounded electrical systems. This true RMS
(root mean square) meter provides accurate readings when measuring
linear or non-linear loads where the current or voltage has a sinusoidal or
nonsinusoidal waveform. The clamp-on head enables the user to measure
resistance on a ground rod in a multi-ground system without the use of
auxiliary ground rods and without disconnecting the other grounds.
Air-tight jaw to
enclose electrode
or ground rod
Freeze value on
screen
Function selector
LCD
Jaw trigger