Cut Sheet

©2018 Amprobe
®
For detailed specications and ordering go to amprobe.com 6009730 AAmprobe
®
| [e-mail] | Fluke Corporation, Everett, WA 98203 | Tel: 877-AMPROBE (267-7623)
amprobe.com
Tip Sensor
Trace wires in
tight spaces
Volume
Adjustment
Full Color
TFT-LCD display
Green arrow indicates
the correct breaker is
identied
Transmission
Mode Indicator
Shows whether
transmitter is in
high, low or loop
mode
Loop Mode
Indicator
High Signal Mode
Loop Mode
Low (Precision)
Mode
Sensitivity
adjustment
AT-6000
Advanced Wire Tracer Series
Locate and trace Energized and De-energized wires, automatically identify breakers
The AT-6000 Series, available in two different kits, combines
a receiver and powerful transmitter to locate Energized and
De-energized wires, breakers, fuses and easily nd breaks and
shorts. Whether you’re a novice or an expert, Amprobe advanced
wire tracers will help you get the job done fast.
The AT-6000-R Receiver detects the signal in wires and cables
using two methods: active tracing method (with the Transmitter)
and passive tracing method (without the Transmitter). In hard-to-
reach areas, the Receiver’s Tip Sensor can be used to trace wires in
corners, tight spaces and junction boxes.
The AT-6000-T Transmitter works on Energized and De-energized
circuits up to 600 V AC/DC in Category I through Category III
electrical environments and features high signal, low signal,
and loop modes. The Breaker Identication feature eliminates
confusion of multiple false positives, common with older
technology tracing tools, by identiying the one correct breaker
or fuse with the highest recorded signal.
The CT-400 Signal Clamp (optional for AT-6020, included with
AT-6030) is used for applications where is no access to the bare
conductors by enabling the AT-6000-T Transmitter to induce a
signal into a wire through the insulation.
Quick Scan Wire Tracing
allows for quick wire
detection at a longer
distance
Precision Wire Tracing
precisely pinpoints wires
or faults located behind
walls, oors, or ceilings
Breaker Identication
is an automatic sensitivity
feature that allows for
quick and easy breaker
locating without the
guesswork
Non-Contact Voltage
Detection utilizes passive
tracing without the
transmitter to verify if
a wire is Energized
AT-6000-R
Receiver
AT-6000-T
Transmitter
Safety Certication
All Amprobe tools, including the Amprobe AT-6000 Series, are rigorously tested for safety, accuracy,
reliability, and ruggedness in our state-of-the-art test lab. In addition, Amprobe products that measure
electricity are listed by a 3rd party safety lab, either UL or CSA. This system assures that Amprobe products meet or
exceed safety regulations and will perform in a tough, professional environment for many years to come.
Four Tracing Modes