Cut Sheet

©2018 Amprobe
®
For detailed specications and ordering go to amprobe.com 6009730 AAmprobe
®
| [e-mail] | Fluke Corporation, Everett, WA 98203 | Tel: 877-AMPROBE (267-7623)
amprobe.com
Specifications
Included in Wire Tracer Kits
AT-6000-R Receiver AT-6000-T Transmitter CT-400 Signal Clamp
Display size LCD 2.5 in (6.35 cm) LEDs –
Display dimensions (W x H) 1.45 x 1.93 in (36.72 x 48.96 mm) – –
Display resolution 240(RGB) x 320 pixels – –
Display type TFT-LCD (262 K) LEDs –
Display color True, 16bit/color
Operating mode LEDs: red
Battery status LEDs: green, yellow, red
–
Booting time < 3 sec < 2 sec –
Backlight • – –
Operating temperature -4 °F to 122 °F (-20 °C to 50 °C) 32 °F to 122 °F (0 °C to 50 °C)
Operating humidity
45%: -4 °F to <50 °F (-20 °C to <10 °C)
95%: 50 °F to <86 °F (10 °C to <30 °C)
75%: 86 °F to <104 °F (30 °C to <40 °C)
45%: 104 °F to 122 °F (40 °C to 50 °C)
95%: 50 °F to <86 °F (10 °C to <30 °C)
75%: 86 °F to <104 °F (30 °C to <40 °C)
45%: 104 °F to <122 °F (40 °C to <50 °C)
Storage temperature and humidity -4 °F to 158 °F (-20 °C to 70 °C), <95% RH
Operating altitude 0 to 6561 ft (2000 m)
Transient protection – 6.00 kV (1.2/50μS surge) –
Pollution degree 2
IP rating IP 52 IP 40
Drop test 3.28 ft (1 m)
Power supply 4 x AA (alkaline or NiMH rechargeable) 8 x AA (alkaline or NiMH rechargeable) –
Power consumption (typical) 110mA
Hi/Lo mode: 70 mA
Loop mode with Clamp: 90 mA Consumption
without signal transmission: 10 mA
–
Battery life Approx. 16 h
Hi/Lo mode: approx. 25 h
Loop mode: approx. 18 h
–
Low battery indication • • –
Fuse – 1.6 A, 700 V, fast-acting, Ø 6x32mm –
Maximum conductor Size – – 1.26 in (32 mm)
Dimensions (L x W x H)
Approx. 7.2 x 2.95 x 1.69 in
(183 x 75 x 43 mm)
Approx. 7.2 x 3.66 x 1.97 in
(183 x 93 x 50 mm)
Approx. 5.9 x 2.75 x 1.18 in
(150 x 70 x 30 mm)
Weight Approx. 1.25 lb (0.57 kg) Approx. 6.18 lb (2.8 kg) Approx. 0.25 lb (0.114 kg)
Certications
AT-6020 AT-6030
AT-6000-R Receiver • •
AT-6000-T Transmitter • •
TL-6000 Test Lead and
Accessory Kit
• •
CC-6000 Hard Carrying Case • •
User Manual • •
12 - Rechargeable Batteries
(not installed)
– •
3 - Battery Chargers – •
CT-400 Signal Clamp (Optional) •
12 - 1.5 V AA (IEC R6) Batteries
(not installed)
• –
Battery chargers and batteries are not available to order separately.
NOTE: Refer to user manual for ADPTR-SCT and TL-6000 specications.
AT-6020 AT-6030