Specification Sheet

Amprobe
®
[e-mail]
Everett, WA 98203
Tel: 877-AMPROBE (267-7623)
Amprobe
®
Europe
In den Engematten 14,
79286 Glottertal, Germany
Tel.: [phone] - 0
For detailed specications and ordering info go to www.Amprobe.com 4265812 B©2013 Amprobe. All rights reserved.
www.Amprobe.com
LT-10 DETAILED SPECIFICATIONS
Specifications Range
Compatible lamps T2, T4, T5, T8, T9, T10, T12 and uorescent energy saving light bulbs
Test voltage Approximately 3 kV / 280 kHz
Field strength Approximately 100 μV/m at 260 - 300 kHz
Maximum antenna length 48"
Filament test T2, T4, T5, T8, T9, T10, T12
VolTect™ non-contact
voltage detection
AC 90 V to AC 600 V, 50/60 Hz
CAT II 300 V, CAT I 600 V
Non-contact voltage
sensitivity with probe tip
(typical)
LED illuminates and beeps at approx. 3 mm (0.12 in) distance from a wire carrying 120 Vac
LED illuminates and beeps at approx. 5 mm (0.2 in) distance from a wire carrying 230 Vac
Drop proof 36”
Operating time One second ON, one second OFF for maximum ve cycles and wait for 1 minute before taking another measurement
Operating temperature -10°C to +50°C (14°F to 122°F) ≤ 85% RH
Storage temperature -10°C to +50°C (14°F to 122°F) ≤ 85% RH
Operating altitude Up to 2000 meters
Battery One 9V lithium or alkaline battery only, 6LR61/6LF22/MN1604 or equivalent.
Battery life Up to 500 tests (Alkaline typically)
Dimensions (L x W x H) Approximately 170 x 40 x 24 mm (6.69 x 1.57 x 0.94 in) without antenna
Weight Approximately 80 g (0.18 lb) with battery installed, excluding 48” antenna
Safety compliance IEC 61010-1, UL 61010-1, CAN/CSA-C22.2 No. 61010-1-2004
EMC compliance IEC 61326-1
Certication CSA and CE
Calibration NA
Warranty 1 Year
For complete specications please download the product datasheet and the users manual on www.Amprobe.com.