Manualshelf

User Manual

ManualsBrandsAmprobe ManualsElectricalFluorescent Light Tester with Non-Contact Voltage Detection
12345678910
6
Test Functions and Indications:
Visual Audio
Lamp test
LED on None
Pin test
LED on Solid tone
Non-contact voltage
LED flashing Modulated beep
Attaching the Antenna
Make sure the switch is securely locked onto the probe before use.
Switch
Figure 1: Attaching the antenna
Removing the Antenna
1
2
Figure 2: Removing the antenna
1
Press and hold down the switch to unlock.
2
Remove the antenna from the probe.
Removing the antenna in a manner not specified in this manual may cause
damages to the instrument and protection provided by the instrument may
be impaired.
Indication
Test