User's Manual

Page32of52

INSTALLATIONOFTHEFIELDCOMPUTER

a. Mounting
b. ACPower
c. InternetconnectionviaEthernet
d. ConnectiontotheGateway
e. Connectiontoalaptop

SPTMOUNTINGANDMECHANICAL
 Mount and ground racking or support structure per NEC Article 690 and manufacturer’s instructions.
EnsurethatsupportstructureisgroundedbeforemountingmodulesorSPTs

Planning
 UseonlystainlesssteelfastenerstosecuretheSPTbrackettothemountingstructure
 Chooseflatbracketsor“L”bracketsfortheinstallation.
 InserttheSPTinthebracketbypushinguntilthepushpinholesalign
 Installmountingpushpins
 PlantomountSPTatleastoneinch(2.5cm)fromthebackofthemodulesurfacetoallowforadequate
coolingairflow.
 Plan to mountSPT,modulecables, and SPTconnectioncabling in a location that will not be subject to
physicaldamage,andwillnotbesubjecttosnoworotherdebrisslides.(reword)

Mountingintorailswith3/8or1/4slots