Installation Manual

PRELIMINARY

String Optimizer V1500-30 Series

Installation Manual: 57070016-1

v20201023

Connecting the Output

1. Read the warning, caution, and notice statements starting on page 20.

2. Make sure you have completed all the steps in the Connecting the Inputs section

starting on page 21.

3. Follow your safety procedures and protocols to ensure the output cables are

appropriately terminated and not under load.

4. Connect the output cables to the OUTPUT connectors of the String Optimizer.

Figure 17: Connecting the output connectors

5. Ensure that the locking mechanisms on all connectors are fully engaged.

6. Ensure that the cable management method prevents tension on each optimizer

connector at all times.

Figure 18: Verify that the connectors are fully engaged and manage cables to prevent tension on the connectors

Use the polarity markings

on the optimizer faceplate

to avoid damaging the unit.

Ensure locking mechanisms on

all connectors are fully engaged

The cable management method must

prevent tension on each connector and

avoid movement of the connecting

wires at all times.